Results 1 to 5 of 5

Thread: Ls2 Scantool Not Tracking

  1. #1
    New Member
    Join Date
    Apr 2005
    Posts
    2

    Default Ls2 Scantool Not Tracking

    can you guys help
    i have upgraded my v2 to the latest soft and firm ware, know the scan tool will not track the timing map.i have checked all the pids and they are supported but it will only track the first or last collum of the spark tabel. can you give me any help. also the comarnded AFR is not correct on the dash.
    PS all the pids in the tune section are marked as not supported is this correct or not.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Linden,

    Make sure the pids shown on the tune map axis's are selected in the scan tool and that they are valid; take a new log with these.

  3. #3
    Lifetime Member
    Join Date
    Sep 2003
    Posts
    688

    Default

    Also make sure the units are right in the scanner.
    EFILive - The Single version of the Truth

    Larry - HumpinSS

  4. #4
    EFILive Reseller ringram's Avatar
    Join Date
    Oct 2005
    Posts
    1,411

    Default

    I think the issue was the SD pid wasnt working. Reconnect MAF and used maf airflow pid and it worked. Not sure why SD pid wasnt working yet.
    Get EFILive in europe (http://www.efilive.eu).
    2007 Escalade ESV L92 6.2L VVT.
    2014 VF SV LS3 Maloo.

  5. #5
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Quote Originally Posted by linden
    the comarnded AFR is not correct on the dash.
    PS all the pids in the tune section are marked as not supported is this correct or not.
    Use GM.AFR_B on the LS2

    The PIDs will be marked as supported once you connect to a vehicle and run the Validate PIDS option.

    Make sure you are using the latest software, here:
    http://forum.efilive.com/showthread.php?t=3906
    It contains some fixes for the PID validation routines.

    Regards
    Paul
    Before asking for help, please read this.

Similar Threads

  1. tracking multiple maps
    By limited cv8r in forum General
    Replies: 4
    Last Post: August 13th, 2008, 08:08 PM
  2. Runway highlighting not tracking
    By Redline Motorsports in forum General
    Replies: 8
    Last Post: June 15th, 2008, 05:14 AM
  3. Cell tracking with the RoadRunner
    By Whippled 496 in forum RoadRunner Real-Time PCM Emulator
    Replies: 2
    Last Post: April 15th, 2008, 02:53 AM
  4. Tuning Tool not tracking MAP properly?
    By gto_in_nc in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: October 13th, 2007, 12:32 PM
  5. Tracking maps with scantool
    By louis in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: September 14th, 2007, 02:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •