On the way back from the store, check engine light came on. Scanned with EFILive and got the CKP Relearn code, tried to relearn with EFILive and no success.
Rey
On the way back from the store, check engine light came on. Scanned with EFILive and got the CKP Relearn code, tried to relearn with EFILive and no success.
Rey
Any errors or symptoms that you can pass on?
I've never done it, byt from what I recall reading there are some pretty strick requirements to perform the procedure.
Also, are you running the latest available build of the software? I recall an update from this a while back as well if I recall correctly.
Cheers,
Andrew
EFILive Crew
I'm using version 7.3.3 with flashscan version 2. Followed directions according to the manual. The injectors don't cut out like the manual states. Tried multiple times. There is no errors when doing the relearn.
Rey
Hmm.. Will wait for someone else to chime in then, maybe it is a V2 thing.
Andrew
EFILive Crew
Here's the procedure:
http://www.ls2.com/forums/showthread...86#post4614086
http://www.ls2.com/boggs/dtcs/DTC%20P1336.htm
Does that help?
Elmer
I did it last summer with V1 and it worked. You have to rev it pretty high as I remember.
2000 C5 Coupe, 6M, Callies/Mahle stroked LS7 (441), Blackwing, Halltech, LS3 intake, 90mm Shaner TB, ported L92 heads, FAST 50# inj, not too much cam, Kooks 1 7/8" headers , 3" catless mid pipes, Z TIs, track suspension, , 3:90 rear, EFI V2, LM-2, etc.
PowrMax Performance
100 mm PowrMAF
LM-2 EFILIve package with TAQ -sLM2 V-2 serial cable> Package deals
I think the deceleration they are referring to is hitting the rev limiter.
2014 Corvette Convertible, Torch Red, A6, Z51, 3LT, NPP Exhaust
I tried pretty much everything, hitting the rev limiter. How long do I have to let the engine idle after revving the engine before shutting off?
Rey
Are you applying the brakes during the procedure..?
Is the PCM seeing the brake switch state bit...?
I applied the brakes, is there anyway to view the brake switch thru EFILive?