Thanks for the update.
Bill
Thanks for the update.
Bill
2011 Camaro 2SS/RS L99 RJT
CAI, Inc. Cold Air Induction;ADM Scoop
Rx Catch Can;Rx Breather;Roto-Fab Washer Container
VMax Ported RJT Throttle Body
XSPower Headers and XSPower 3" Exhaust System
Elite Engineering Tunnel Brace,
Gorilla Wheel Lock System;
Tinted Windows 35%;EFILive Tune
This is going to take away the fun of the many hours of constant logging and tuning sesions!
I am sure you could still do it the old way..Originally Posted by johnsZ06
Bill
2011 Camaro 2SS/RS L99 RJT
CAI, Inc. Cold Air Induction;ADM Scoop
Rx Catch Can;Rx Breather;Roto-Fab Washer Container
VMax Ported RJT Throttle Body
XSPower Headers and XSPower 3" Exhaust System
Elite Engineering Tunnel Brace,
Gorilla Wheel Lock System;
Tinted Windows 35%;EFILive Tune
so this will only work with with the commercial version? no chance of getting it just for the people at home with the personal version?
and this will support a 2 or 3 bar map setup, so those of us wanting to run FI will be able to take full advantage of this??
This is sounding great
Thanks
ed
Will there be a "how to" for using AutoTune (with and without a MAF)?
02 C5 Coupe - LS7, TSP 265 LS7 heads, ARH, Z06 cat-back, HREs, 3.73 gears, Wilwood brakes, DeWitts radiator
15 C7 Z5 1 Coupe - stock for now
12 Avalanche - tune, Corsa Touring
Is this Auto-Tune capability in the new 7.2.1 pre-release :?:
Yes.
Want to give me a clue as to where? I can't see anything in the documentation (doesn't appear to be updated), and can't see any new menus etc. in either the Scan or Tune tools.
Cheers.
Its' not a menu item as such.
It's a sequence of steps that you need to perform. Each step in the sequence has a corresponding task that can now be performed by the Scan Tool software.
A tutorial will be posted soon.
Regards
Paul
Tried out the new auto tune feature today and was pasting as factor with label as suggested by a beta tester but have found that if you past a cell that has a 0% LTFT then it kind of muddles things up and puts the VE table out of whack.
Need to somehow modify the filter to exclude cells @ 0%.
EDIT: Duh, I was using the LTFT MAPs instead of the new BEN maps. No need for another filter as the BEN maps show 1.00 if it cell doesn't need to be changed.