Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: RR and stock PCM

  1. #1
    Lifetime Member minytrker's Avatar
    Join Date
    Jan 2006
    Posts
    1,332

    Default RR and stock PCM

    Whats the correct way to save your tune once your done tuning with the RR and want to swap back to the stock pcm. How do you then flash it into the stock pcm. I clicked or did something wrong today because it took me a few tries to get the stock pcm to work right. I either wasnt ssaving something right or either fashing the pcm wrong.

  2. #2
    EFILive Reseller ringram's Avatar
    Join Date
    Oct 2005
    Posts
    1,411

    Default

    Save file as per normal and then depending on what OS is in your stock PCM do either a calibration flash or full reflash after you have replaced the road runner with the stock pcm in the car.
    Should be fine.
    Maybe do a full reflash if you have forgotten what was in there.
    Get EFILive in europe (http://www.efilive.eu).
    2007 Escalade ESV L92 6.2L VVT.
    2014 VF SV LS3 Maloo.

  3. #3
    Lifetime Member minytrker's Avatar
    Join Date
    Jan 2006
    Posts
    1,332

    Default

    I got that part down with no problems. I ran into problems when I went to put the stock pcm back in.

  4. #4
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    Did you need to turn the security stuff back on, or do a relink?
    Andrew
    EFILive Crew


  5. #5
    Lifetime Member minytrker's Avatar
    Join Date
    Jan 2006
    Posts
    1,332

    Default

    I didnt have to turn off anything or do a relink.

  6. #6
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    What is your G1201 set to?
    Andrew
    EFILive Crew


  7. #7
    Lifetime Member minytrker's Avatar
    Join Date
    Jan 2006
    Posts
    1,332

    Default

    I just checked, I had it turned off in the tune already. Thats why I didnt have to mess with it.

  8. #8
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    Thanks mate. Was going to be concerned if you didn't have to do that
    Andrew
    EFILive Crew


  9. #9
    Member VT LS1 NZ's Avatar
    Join Date
    Apr 2003
    Posts
    79

    Default

    Quote Originally Posted by Tordne
    What is your G1201 set to?

    Andrew mine is still set to class 2.
    I've never had an issue with security,so therefore I've never done a relink since running RR .
    I thought this would be an issue when I first installed RR but it started right up so I've never given it a second thought.
    856RWHP 408 Supercharged LS1 Holden Commodore.

  10. #10
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    I did not want to hear that

    Hmm, wonder what it could be then...
    Andrew
    EFILive Crew


Page 1 of 2 12 LastLast

Similar Threads

  1. Stock 2.2l 98 S-10
    By trudynosports in forum IL4, 97-01 PCM and 02+ P11 PCM
    Replies: 16
    Last Post: July 6th, 2010, 08:18 AM
  2. GETTING some HP from a stock Gen-IV V8
    By A.O.A in forum Gen IV V8 Specific
    Replies: 11
    Last Post: June 7th, 2009, 07:57 PM
  3. Stock Bin
    By teddyls1 in forum Gen III V8 Specific
    Replies: 2
    Last Post: May 10th, 2008, 04:03 AM
  4. Need stock .bin
    By SSpdDmon in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: September 5th, 2006, 07:25 AM
  5. Is this a stock 02 ZO6 cal?
    By Redline Motorsports in forum General (Petrol, Gas, Ethanol)
    Replies: 11
    Last Post: August 15th, 2006, 11:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •