cant connect
Help anybody - Just connecting for first time EFI to 2004.5 Duramax to send off stock tune to get new one. Will not get past "EFI Live cannot connect to Flashscan. Disconnect cables and try again" I havetried that 20 times - I must be missing someyhing - anybody any ideas? Thanks Mick
Here are a few things to check
Any lights on your flash scan cable when you try to connect?
Did you install the latests USB drivers?
Latest EFILive software?
Did you select the "LLY ECM" option from the drop down menu?
Will the scan tool connect?
Is the scan tool connected when you try to read the ECM?
Try a different usb port on your pc
04 2500, LLY/A, 4x4, CC, SB, 285 Toyo's, Amsoil lubes, Access Roll-up Tonneau, ATS Stage 2 trans, ATS 5 Star Converter, Bilstein's, Caltracs bars, Cognito Braces, EFILive, Kennedy Diesel Custom Tuning, Kennedy Diesel headlight harness, Kennedy Dual Lift Pump/Filter combo, Prodigy brake controller, Spa DG 211, Trippin Cyclops overhead gauge mount, , TTS 4" Exhaust, TTS Xtreme Beta, Amsoil Ea filters, Banks CAI
cant connect
2 Lights continuously flashing OBD and USB. Computor is Toshiba Laptop - new yesterday - EFI is V7.3.2 - black Box says FSP V1.2 LLY ECM is selected - Scan Tool says Interface Cable not connected error 31? - tried both USB's - Regards mick
If you go to Device Manager, under 'Universal Serial Bus controllers' can you see something like FSP... device?
Andrew
EFILive Crew
cant connect
I have the Universal Serial Bus Controllers but no FSP Device in there -
Download the newest version of EFILive 7.3.3. Then, once install is complete, plug you FS device in and see if it is recognized (should hear the windows "da-ding"). Install the drivers as the drivers install manual says, and then try again.
~Erik~
2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.
I forgot to mention that you need to have the device connected when looking in Device Manager... If it is connected and not showing then the problem is that the drivers are not loaded correctly (or at all). If the device is not listed under the 'Universal Serial Bus controllers' section check for it under 'Unknown Devices' also.
Andrew
EFILive Crew
cant connect
Its all ok - with a little help from 9 yo son. Went to new hardware loaded Drivers and bingo - Thanks all anyway. I'm a little backward on the technical side of the computers but nothing like experiencing it yourself - Regards
Glad it's all working... Knew it was going to be the drivers though
Andrew
EFILive Crew
cant connect
Thanks - I appreciate it anyway. You are just a smarter kiwi than this ex one
Last edited by mickkk; December 21st, 2006 at 10:09 AM.
Posting Permissions
Reply With Quote