EFILive V7.3.3 Software Release - Updated Dec 23, 2006

[jimmydiesel]

Thank you guys both for the ultra quick responce. I am running a Verizon broadband wireless but it is fairly slow here at the house.(obviously!)
I will just wait 'till tomorrow when I am in town, it will be highspeed there.
Also, I couldn't run program, only save it ? Is that what I wanted to do anyway?....WHAT A DUMMY!
THANKS AGAIN, Jim

[Tordne]

Generally best to save the file, but either would have worked ok (provided it downloaded correctly).

[Acer]

Thanks Paul. Updates to new versions (including firmware) worked flawlessly as usual. Which were the new calibrations added for the LS2s to the tuning tool?

Guess it is intentional but I noticed that even if you select AFR units that they are actually displayed in EQ Ratio when opening LS2 files where the LS1 ones are shown correctly.

Cheers,

Acer

[Chevy366]

When you open a compare file it shows {B0102} VE while cranking , as values are different when they are not , compare file as file and shows difference , but can't be any .

[Black02SS]

Change the bottom setting to greater then .01 and you probably won't see it.

[Chevy366]

Change the bottom setting to greater then .01 and you probably won't see it.

OK , why would you need to do that , "all" is selected by default would that not include ".01" , so why is it showing the file to be different ?
Not to beat a dead horse but , the last update did not require you to select different variables .

[Blacky]

When you open a compare file it shows {B0102} VE while cranking , as values are different when they are not , compare file as file and shows difference , but can't be any .

Go to the calibration {B0102} and set the precision to display 6 decimal places (which is the maximum), using menu: Calibration->Increase precision, or the equivalent toolbar icon.

Then select the difference display to see which cells are different and by how much, using menu: Calibration->Show calibration differences, or the equivalent toolbar icon.

Regards
Paul

[Blacky]

Thanks Paul. Updates to new versions (including firmware) worked flawlessly as usual. Which were the new calibrations added for the LS2s to the tuning tool?

I don't know, Ross (GMPX) would have to answer that.

Guess it is intentional but I noticed that even if you select AFR units that they are actually displayed in EQ Ratio when opening LS2 files where the LS1 ones are shown correctly.
Cheers,
Acer

Tables that are EQ Ratio modifiers will always be displayed as EQ Ratio. Only tables that show an absolute EQ Ratio value can be accurately converted into and displayed as AFR.
See Appendix B in the tuning tool manual for a more details explanation.

Regards
Paul

[Extinct]

You guys Rock !! Thanks for the LBZ support !!!!



Merry Xmas and HAPPY NEW YEAR !!!

[diynoob]

Does this release include RAFIG DMA PID support for OS 12593358? I am trying to determine if I should download and install this version or not, I really just need to be able to RAFIG my 03 Z06