Has anybody noticed that the RPM calculator per gear at the bottom of the screen only shows N/A for the T42 trans files. Is this going to be a future update or is it not possible to implement on these files.
RPM calculator
Has anybody noticed that the RPM calculator per gear at the bottom of the screen only shows N/A for the T42 trans files. Is this going to be a future update or is it not possible to implement on these files.
It's all good until it goes "Bang"
It may be implemented in future. The problem is that when the trans *.tun file is loaded EFILive does not "know" the diff ratio, so it can't calculate the engine RPM for the given speed.
What we will probably do is allow the user to enter a diff ratio that will be used to calculate/display the engine RPM.
Edit: Looks like the diff ratio is in there as {D7007} - look for the update in the next release.
Regards
Paul
Before asking for help, please read this.
As everybody has said before "ask and you will recieve".
Top stuff, will save me having to put numbers into a gen 3 file to get some figures.
It's all good until it goes "Bang"
I think I have the same issue with my TrailBlazer LL8 I6 with the 4L60E trans, always get 0s down there.
~Erik~
2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.
I was just going to put the numbers into a gen 3 tune with the same tranny & diff ratios and then copy , paste the numbers to the T42 tune.
It's all good until it goes "Bang"
Posting Permissions
Reply With Quote