Well works great when standstill, comes on at 3000rpm as set, also works when driving but comes on also when coasting when throthle closed hmm why?
Well works great when standstill, comes on at 3000rpm as set, also works when driving but comes on also when coasting when throthle closed hmm why?
Well, wired 47 and 56 up from the PCM this morning, and installed the shift light ... 6 LEds, mounted inside the left center air duct ... working great, may still put the parallel resistor in to get rid of the slight glow from the LEDs, though it's hardly noticeable ... still have to splice the 12V to the circuit and change the PCM back from 1200 RPM to something like 5500 (I reckon that should be a good RPM to shift on a stock engine?)
Garry Glendown * '17 Fifty 2SS MT * 99 Firehawk Convertible (for sale)
I have an 04 GTO, even with the built in shift light, could I run these wires into my guage cluster and have the same result? Or would just mounting LEDs on the dash somewhere just be better?
2004 GTO M6
- Custom tune
-- KnN CAI
--- IAT relocate
---- JBA catless mids
----- JBA catback
----- DBA 4000XS rotors
------ 05/06 rear bumper conversaion
------- 25% tint all arround