I think the E38 is the box in my 07 LS2 Vette. I'm going to guess one more step and say the E67 is for the Z06?
I think the E38 is the box in my 07 LS2 Vette. I'm going to guess one more step and say the E67 is for the Z06?
2014 Corvette Convertible, Torch Red, A6, Z51, 3LT, NPP Exhaust
The E38 is in the ZO6 as well as all 07' vettes.
www.redline-motorsports.net
1-954-703-5560
2006 ZO6 895/866 with APS TT
2010 SSRS Camaro HTR-900TT (798/801)
2011 HTR-850R Camaro
2012 ZL1 Auto (10.33@135 MPH) Video Here!
Ah, then I see a huge need for this E38 thingie.Originally Posted by Redline Motorsports
Thanks,
Elmer
Can you guys scan the LS7 with the current v2?
I think Paul? said use the E40 ECM and that some of the pids work.
Can anyone confirm. I have some guys who want to log a few dyno runs.
Get EFILive in europe (http://www.efilive.eu).
2007 Escalade ESV L92 6.2L VVT.
2014 VF SV LS3 Maloo.
yes you can i did it couple weeks ago seem little off though
how about the 07 ls2 tb ss? I am soo tired of the Torque management and stabiltrack and it dose'nt even have 500 miles on it yet. it needs to be turned on and let loose. I did smack the snot out of a super bee though!!
Dana
why not just read the TCM t42 trans from it and delete the TM if you want to? Im sure that is supported. Tm would be in the trans cal.
"If you can leave a black mark on the pavement, from the exit of one corner to the braking point of the next one, you have enough horsepower."
I cant get past the BL with efi live v2 at all. and the truck has the 70e trans so it is dead. I even went as far as JTAGing the bus and force a dump but I have yet to see code like this. ?
Any update for the 2006 Z06? Soon?
Thanks, George
George
2015 Z06 Corvette
2008 Z06 Corvette
Version 7.4 release recently introduced read support for the E38/E67 PCM which is used in these vehicles. Flash support will be out pretty soon - calibrations etc are being created now.
Andrew
EFILive Crew