Help, would someone please review this?

[NewV]

I seem to be chasing my tail on the AutoVE flipping from rich to lean after each session. Would someone mind looking at my tune to verify I am setup correctly?

I have gone over it multiple times and just can't find where I am going wrong.

Attached are the PID file, last 2 tune files and the logs that follow each application. I did change C6101 to +50% due to 'reduced power' mode being invoked, this got rid of that and I believe is unrelated. The only DTC I am getting is P103.

[Tordne]

Send to efilive at holdencrazy dot com and I'll have a look to make sure that you are setup right to be doing the AutoVE process.

[NewV]

Send to efilive at holdencrazy dot com and I'll have a look to make sure that you are setup right to be doing the AutoVE process.

Thx, I removed the attachments and will email them.

[TAQuickness]

Thx, I removed the attachments and will email them.

I was wondering where they were. Tordne should get you fixed up pretty quick.