Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: OK, now what?

  1. #1
    Lifetime Member eboggs_jkvl's Avatar
    Join Date
    Apr 2004
    Posts
    757

    Question OK, now what?

    I did the "firmware update and I get: "Upgrade pending" "Before using this device, select the Flashscan V2 Upgrade Option on your PC"

    Exactly where is that?

    There is a 12 digit number appearing on the V2


    I already have the V2 USB installed.

    What the hell does this thing want?

    Elmer
    2014 Corvette Convertible, Torch Red, A6, Z51, 3LT, NPP Exhaust



  2. #2
    Lifetime Member eboggs_jkvl's Avatar
    Join Date
    Apr 2004
    Posts
    757

    Default

    Well shit. OK, I found the Flash Scan V2 Upgrade Option.

    What the hell do I put in? Too much red text and warnings to screw this up.

    Elmer
    Last edited by eboggs_jkvl; January 15th, 2007 at 09:11 AM.

  3. #3
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,501

    Default

    Hi Elmer,

    Basically it is a simple process. You just need to decide which license slots you need want to copy/move from your V1 to your V2 cable.

    You can copy used licenses, I highly recommend selecting this option because then you can tune those licensed vehicles using both cables.

    You can move unused licenses. Unused licenses will be flagged as "upgraded" in the V1 cable and cannot be used anymore on the V1 cable. They will be added to the V2 cable as unused VIN licenses.

    That's really the only two choices you need to make.

    Before you click the Upgrade button, the left side of the screen shows the licenses your V1 will have on it after you perform upgrade, the right side of the screen shows the licenses your V2 will have after you perform the upgrade.

    Regards
    Paul
    Before asking for help, please read this.

  4. #4
    Lifetime Member eboggs_jkvl's Avatar
    Join Date
    Apr 2004
    Posts
    757

    Default

    Crikey! I have to find the V1 connector to get the 1 license I used on my son's car. My 98 didn't use any licenses and the new Corvette will use the 2nd one I have available. Oh hell! Where did I put that darn thing. I didn't think I needed it anymore.

  5. #5
    Lifetime Member eboggs_jkvl's Avatar
    Join Date
    Apr 2004
    Posts
    757

    Default

    We are not doing well in the quest to find that darn V1 thingie. I've got a new vette in the Garage and I can't bitch-slap that darn CAGs! Grrrr.

    Elmer
    Last edited by eboggs_jkvl; January 17th, 2007 at 09:29 AM.

  6. #6
    EFILive Reseller ringram's Avatar
    Join Date
    Oct 2005
    Posts
    1,411

    Default

    98 Vette still shouldnt use any licenses IIRC even on v2
    Get EFILive in europe (http://www.efilive.eu).
    2007 Escalade ESV L92 6.2L VVT.
    2014 VF SV LS3 Maloo.

  7. #7
    EFILive Reseller kbracing96's Avatar
    Join Date
    Sep 2005
    Posts
    584

    Default

    Quote Originally Posted by ringram
    98 Vette still shouldnt use any licenses IIRC even on v2
    But ya got to run the transfer utility before you can use the V2, or you can't do the transfer. Once you close out the transer part, you can't go back to it.
    01 ECSB 1/2 ton 4x4 Forged 5.7 LS1 GMC

    Custom KBracing front mounted, BW S480, intercooled turbo


  8. #8
    Lifetime Member eboggs_jkvl's Avatar
    Join Date
    Apr 2004
    Posts
    757

    Default

    You are correct on the 98 thing, I had not used a license on it. I did tag one license for my son's car when he put my old LS1 into his 83 Camaro and used a 99+ PCM in his car. I'm still looking but I'm feeling older and older as the minutes go by. Shit, what the hell did I do with it? Maybe the cat ate it?

  9. #9
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,501

    Default

    I can send you a code to bypass the upgrade process but by doing that you'll not get any licenses from your V1 transferred to your V2 unit. If you're happy "losing" those V1 licenses, then let me know and I'll send the code.

    Regards
    Paul
    Before asking for help, please read this.

  10. #10
    Lifetime Member eboggs_jkvl's Avatar
    Join Date
    Apr 2004
    Posts
    757

    Default

    We might get to that. I'm still looking for the darn thing. Does the V2 come with 1 or 2 licenses? My old V1 only had my son's car on it with one other license spare. I haven't given up yet. Old people have lousy memories. We put stuff in "safe" places so we won't lose it. Right... can't find it but it ain't lost! (Yet!)

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •