Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Service Number 9354896

  1. #1
    Lifetime Member
    Join Date
    Dec 2005
    Posts
    358

    Default Service Number 9354896

    does anyone know if service number 9354896 ecm will work with custom operating system 01250003.i flashed a 12202088 operating system tune into it.its in a 2000 truck had a 09381344 operating system i then checked the other stuff that was differant and put them back in.running the auto tune goes way lean i am guessing you cant up date that ecm with the newer 2001 flash to make it work my ve is over 120 still lean so some things up i have the tune and log if some one wants to look at it. thanks

  2. #2
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    I'd expect that you could update that to the 2002 year OS and then run the matching EFILive Custom OS. The trucks seems to use the 12212156 OS as the 2002 F-Body vehicles. The COS for that OS is 0202000x.
    Andrew
    EFILive Crew


  3. #3
    Lifetime Member
    Join Date
    Dec 2005
    Posts
    358

    Default same problem

    tryed that operating system same thing.whats wierd is the battery light keeps flashing runs really lean over part throttle and full throttle still

  4. #4
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    Just for clarity:

    1) Does the truck run on 12212156 OS?
    2) Does it run on 12202088 OS?
    3) The stock OS was 09381344?

    The leanness is tune related and can be resolved more than likely.
    Andrew
    EFILive Crew


  5. #5
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    I know on our local cars the earlier ones ran different injectors, so going from a 2000 O.S to a 2002 caused problems with fueling, the injector tables did need to be rescaled.

    Cheers,
    Ross
    I no longer monitor the forum, please either post your question or create a support ticket.

  6. #6
    EFILive Reseller ringram's Avatar
    Join Date
    Oct 2005
    Posts
    1,411

    Default

    Plus some trucks have a PE delay too.
    Get EFILive in europe (http://www.efilive.eu).
    2007 Escalade ESV L92 6.2L VVT.
    2014 VF SV LS3 Maloo.

  7. #7
    Lifetime Member
    Join Date
    Dec 2005
    Posts
    358

    Default

    The stock OS was 09381344 i think thats the problem the battery light flashing kind of tells me some things up,i would think some one has flashed a custom operating system in a 2000 4*4 and made it work,the pe delay was off on the first operating system i tryed was on for 2 secs on this one but with custom operating system it looks at afr map so i wouldnt think that would make a differance.i just need some one who has done a custom operating system on a 2000 5.3 4*4 to talk to i guess

  8. #8
    Senior Member
    Join Date
    Mar 2005
    Posts
    105

    Default

    I have a 2000 4x4 that had OS # 9381344 that I reflashed with 2001 COS3 # 1270003. I then reflashed the 12208322 4x4 file into the pcm, read it back as my master file and then made my changes from there. Mine was a 5.3L that I had put a 6.0L in and it required several changes. I have it setup in OLSD and it works very well. You should select the right OS for your application if it is a Camaro with Man trans. I just followed the tutorials, lurked here and there for info and applied it. I Hope this helps you.

    Ron
    Last edited by RonC; January 14th, 2007 at 08:40 AM.

  9. #9
    Lifetime Member
    Join Date
    Dec 2005
    Posts
    358

    Default 4*4 Operating Systems

    figures thats one that i didnt try did you try 12202088 or 12212156 they didnt work for me.i used custom 02020003 for 12202088 and custom 01250003 for 12212156.loaded the custom file in then the stock operating system did a read and set that up.reflashed that in and it ran fine at low speeds battery light was on on both of them. didnt respond to fuel changes. i think if i used your operating system it should work though it did for you are you running a na motor if so i could try your flash if you send it to me i will load my ve tables, timing tables,change the injector tables and cylinder valume and try it. are you running a 4l60 trans also (not sure if it makes a differance) i did a ve recalibrtion then the mass air was off so did the mas air recalibraion logging 02 and mas air feq % air that was kool makes me want to use sd even more lol worked get tuning it like that but keep being lean after i added like 3 times the 4th logg run shows was to rich so i wind up going back about 2 flash guess when you have small err % in ve and mas air it all adds up give me one small % sd trying to tune with 2 things controling fuel will run you in circles. thanks for the info i new some one probly did a custom operating system on a older operating system with up grading

  10. #10
    Senior Member
    Join Date
    Mar 2005
    Posts
    105

    Default

    What setup are you running exactly? A 2000 4x4 auto I asssume? Mods? Are you trying to run a Camaro OS in a 4x4 truck? If so,no wonder your are having problems. If it is a 2000 4x4 4l60e, I will send you my 2001 COS3 1270003 based on 12208322 if you PM me your email address. I used this one because it was the only one I had at the time. All I did was follow the tutorial to upgrade to a COS and it worked great.

Page 1 of 2 12 LastLast

Similar Threads

  1. XP service pack 3
    By DaddySS in forum Lounge
    Replies: 12
    Last Post: August 14th, 2008, 04:42 AM
  2. Vista Service Pack 1
    By Chevy366 in forum Lounge
    Replies: 8
    Last Post: September 21st, 2007, 06:22 AM
  3. Great service
    By Chevy366 in forum Lounge
    Replies: 0
    Last Post: April 10th, 2007, 04:15 PM
  4. GM Service Manuals
    By TAQuickness in forum Lounge
    Replies: 15
    Last Post: August 10th, 2006, 09:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •