Results 1 to 3 of 3

Thread: unknown timing getting added at WOT

  1. #1
    Member
    Join Date
    Aug 2008
    Posts
    59

    Default unknown timing getting added at WOT

    I haven't a clue where its coming from. It ramps in and add about 10 degrees.
    Its an 06 1500 truck 5.3 turbo on 8 PSI threw the MAFF Its runs hard! But i don't like 20 21 degrees at WOT! lol

    Don't have a current log forgot to save it. Will get one tonight.

    Current tune is attached, I can't find anything i may have for got about. Maybe another set of eyes would help.

    Thanks Brad
    Attached Files Attached Files

  2. #2
    R.I.P Shawn, 1956-2011 WeathermanShawn's Avatar
    Join Date
    Jul 2008
    Posts
    1,807

    Default

    Brad:

    Not as familiar with your OS, but if your fueling is following the Commanded EQ in B3618, then most likely it is being added in B5908. You have up to 10 degrees of Spark being added there.

    Of course a log and with all theSpark Pids selected would confirm it.
    2002 Black Camaro Z-28 M6 Hardtop 11.0:1CR 425HP/410TQ SAE (400TQ@3500RPM)
    200cc Heads, 228/232 110+2 Cam, 1 3/4" LT's w/catts, GMMG, Koni Shocks, Hotchkis Springs, 35/21 Sways, 17" ZR1's, 3.90 Gears Roadrunner PCM LM-2 Serial Wideband
    EFILive Closed-Loop MAF/SD Hybrid Tune..


  3. #3
    Member
    Join Date
    Aug 2008
    Posts
    59

    Default

    Wow, can't believe i over looked that table. It was a late night last night. My eye weren't working very well.

    Thanks Shawn! I'll try it tonight.

    Brad

Similar Threads

  1. WOT AFR & Timing Tuning
    By blsnelling in forum Gen III V8 Specific
    Replies: 19
    Last Post: November 2nd, 2010, 07:38 PM
  2. WOT aft and timing
    By maudyZ28 in forum Gen III V8 Specific
    Replies: 20
    Last Post: May 6th, 2010, 05:43 AM
  3. wot timing?????
    By twinki025 in forum Gen III V8 Specific
    Replies: 11
    Last Post: October 25th, 2007, 02:29 PM
  4. Loosing 18* of timing at WOT!
    By johnsZ06 in forum Gen III V8 Specific
    Replies: 4
    Last Post: June 2nd, 2007, 08:39 AM
  5. Added a New Gauge!
    By mistermike in forum Lounge
    Replies: 3
    Last Post: January 17th, 2006, 04:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •