Results 1 to 2 of 2

Thread: LS2 fuel Trim Cell# and Engine Zone1_DMA

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Lifetime Member MICK's Avatar
    Join Date
    Mar 2005
    Posts
    226

    Default LS2 fuel Trim Cell# and Engine Zone1_DMA

    Does anyone have any info on the Fuel Trim Cell # layout on the LS2?

    I read some where the LS2 is split into 40 blocks?

    Anyone have any info on the block layout?

    I was also chasing up some info with the Engine Zone1_DMA count. Whats up here?

    Any takers?

    Cheers

    Mick

  2. #2

    Default

    TTT!

    Good topic. I have read a bit on the "zone" method of how the PCM determines fueling on the E38 PCM and its a bit involved. Not sure how it equates to the LS2 systems. Jesse.....................where are yah!

    Howard

    www.redline-motorsports.net

    1-954-703-5560

    2006 ZO6 895/866 with APS TT
    2010 SSRS Camaro HTR-900TT (798/801)
    2011 HTR-850R Camaro
    2012 ZL1 Auto (10.33@135 MPH) Video Here!

Similar Threads

  1. Fuel trim cell boundries / zones?
    By JAY4SPEED in forum E37, E38 & E67 PFI ECM's
    Replies: 0
    Last Post: September 21st, 2009, 03:00 PM
  2. Fuel Trim help needed, please advise
    By kwhiteside in forum Gen III V8 Specific
    Replies: 5
    Last Post: August 26th, 2009, 06:15 AM
  3. Fuel Trim Cell Issue with 7.5
    By MoTruck in forum General
    Replies: 0
    Last Post: February 2nd, 2008, 05:26 AM
  4. Fuel Trim Cell PID
    By VetPet in forum Petrol / Gas
    Replies: 5
    Last Post: April 9th, 2007, 05:24 PM
  5. Fuel Trim Cell 10
    By eboggs_jkvl in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: December 20th, 2005, 11:24 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •