Interactive Tutorials

[joecar]

Rich, do you have V7 build 211...?

Can you post a screenshot of that...

[Rich Z]

I think that I may have figured it out. I believe the values in the tune file table and the map table were different.

And yes, I am using the latest version numbers that were available for download. I believe I did the upgrade a couple of weeks ago.

Thanks.

[COONDOG96]

In the autoVE tutorials it sayes to do Wideband o2s anolog I'm set up serial do I have to change?

[joecar]

In the autoVE tutorials it sayes to do Wideband o2s anolog I'm set up serial do I have to change?

No... do this instead: modify the procedure to use your serial wideband.


Also, you could use the pids from the Calc.VET thread (meaning that you would use the pid WO2BEN instead of what the AutoVE tutorial says)


( yes, the tutorial needs to be updated and modernized )

[COONDOG96]

Ok thanks I'm still learning . trying to get VEs closer is this a good place to start?

No... do this instead: modify the procedure to use your serial wideband.


Also, you could use the pids from the Calc.VET thread (meaning that you would use the pid WO2BEN instead of what the AutoVE tutorial says)


( yes, the tutorial needs to be updated and modernized )

[joecar]

Ok thanks I'm still learning . trying to get VEs closer is this a good place to start?

It will be easiest to try the Calc.VET method, see post #1 here (read all the links):

A-New-Twist-on-CALC-VE-Table-Computing-the-Entire-VE-Table