Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: Getting PCM Locked Message

  1. #1
    Senior Member
    Join Date
    Oct 2005
    Posts
    196

    Default Getting PCM Locked Message

    Hi Guys,

    I'm posting for a friend of mine that just received V2. When he tries to connect to the PCM (2006 vette) it acts like it's going to connect and then partway through he gets a message that says 'PCM Locked'. I'm not familiar with V2 but after speaking to him on the phone it doesn't seem different than V1 except when you have to choose which GEN XX engine you're working with. Can anyone tell me what might be causing this problem?

    Thanks

  2. #2
    Lifetime Member TAQuickness's Avatar
    Join Date
    Jan 2005
    Posts
    2,940

    Default

    What's the seed?


  3. #3
    Senior Member
    Join Date
    Oct 2005
    Posts
    196

    Default

    Dont' know. I'll have to find out. How would this cause the problem?


  4. #4

  5. #5
    Guess who's back!!!! Black02SS's Avatar
    Join Date
    Jan 2004
    Posts
    1,355

    Default

    Has the vehicle been tuned previously?

  6. #6
    EFILive Reseller wait4me's Avatar
    Join Date
    Aug 2004
    Posts
    1,348

    Default

    What type of vette? A z06 or standard?
    "If you can leave a black mark on the pavement, from the exit of one corner to the braking point of the next one, you have enough horsepower."

  7. #7
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,500

    Default

    Just for everyone elses benefit who may have the same issue, this was the reply sent from EFILvie support:

    There are three possible reasons that can happen.

    (Edit: all these points have been covered by the questions asked by previous posters in this thread - you're all on the ball guys, nice!)

    1. The ECM really is locked, i.e. another tuner has tuned the ECM and locked the tune. In that case the tuner who locked it will need to unlock it.

    2. EFILive displays the ECM's seed value as $FFFF in green text in the information window of the ECM flash reading window. If that is the case, then enter the value $FFFF in the Key field in the top left of the ECM reading window (include the $ sign).

    3. You are attempting to read an LS2 (E38) ECM. EFILive does not have support for the E38 ECM yet, it will be supported in early 2007.

    You can tell the difference between the E40 and E38 ECMs: The E40 had three plugs on it, the E38 has only 2.

    Regards
    Paul
    Before asking for help, please read this.

  8. #8
    Senior Member
    Join Date
    Oct 2005
    Posts
    196

    Default

    Thank you for all the replies. I've been away the last 5 days but will talk to my buddy and see if any of these are the issues. Will report back my findings.


  9. #9
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Quote Originally Posted by Blacky
    You can tell the difference between the E40 and E38 ECMs: The E40 had three plugs on it, the E38 has only 2.

    Regards
    Paul
    See here - http://forum.efilive.com/showthread.php?t=3876
    I no longer monitor the forum, please either post your question or create a support ticket.

  10. #10
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    What a cute family photo
    Andrew
    EFILive Crew


Page 1 of 2 12 LastLast

Similar Threads

  1. Ignition welcome message
    By stigmundfreud in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: March 29th, 2008, 11:39 AM
  2. Message Problem
    By driver456 in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: March 21st, 2008, 09:45 AM
  3. Error Message
    By TNRGreene in forum General (Diesel)
    Replies: 7
    Last Post: June 13th, 2007, 11:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •