Results 1 to 6 of 6

Thread: 2-3 not shifting

  1. #1
    Member
    Join Date
    Oct 2005
    Posts
    50

    Default 2-3 not shifting

    o.k.,

    2002 Holden Camador ( Lumina ) 5.7L

    All shifting points are fine except the 2nd to 3rd :(
    It doesn't shift tell it hits the Rev Limiter !!!

    I even put the Rev Limiter at 7200 and the shifting point at 6400. Yet it doesn't shift with WOT and it hits 7200.
    I have to take my foot from the pedal so it will shift and then repress.

    I have also changed the shifting solenoid thinking it was not good but no luck :(

  2. #2
    Lifetime Member Biggsy's Avatar
    Join Date
    Jan 2007
    Posts
    410

    Default

    Check where your 3-2 downshift is set at.
    Post your tune so people can look at it.
    Dave.

  3. #3
    Member
    Join Date
    Oct 2005
    Posts
    50

    Default

    Sorry and thanks
    Attached Files Attached Files

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Assami,

    Reduce the 2-3 WOT MPH (and also set 3-2 WOT MPH to be below that) to say 50 MPH, and see if you get the shift;

    if yes, then increment to 55 and test again (and continue to 60, 65);
    if no, then reduce the 2-3 WOT RPM to 5000 and test again;

    At all times: keep the 3-2 WOT MPH at least 5 MPH below the 2-3 WOT MPH.

    I would also suggest setting all the Kickdown Throttle settings to 100%.

  5. #5
    Junior Member billiardcue's Avatar
    Join Date
    Jan 2005
    Posts
    30

    Default

    Quote Originally Posted by joecar
    Assami,

    Reduce the 2-3 WOT MPH (and also set 3-2 WOT MPH to be below that) to say 50 MPH, and see if you get the shift;

    if yes, then increment to 55 and test again (and continue to 60, 65);
    if no, then reduce the 2-3 WOT RPM to 5000 and test again;

    At all times: keep the 3-2 WOT MPH at least 5 MPH below the 2-3 WOT MPH.

    I would also suggest setting all the Kickdown Throttle settings to 100%.
    Is this also true for the 1-2 and 2-1 shift settings?
    Dick Abbott

  6. #6
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by billiardcue
    Is this also true for the 1-2 and 2-1 shift settings?
    Yes, same method applies for 1-2 and 2-1.

Similar Threads

  1. 4x4 shifting
    By southern in forum Gen III V8 Specific
    Replies: 4
    Last Post: May 18th, 2010, 10:13 PM
  2. Trans not shifting at WOT
    By acsf in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 4
    Last Post: May 9th, 2009, 12:34 AM
  3. What is the difference between shifting VSS and RPM?
    By odd boy in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 12
    Last Post: May 19th, 2008, 05:34 PM
  4. LS1 PCM Performance shifting
    By Cougar281 in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 0
    Last Post: January 24th, 2008, 01:31 PM
  5. Sloppy Shifting H2
    By dfe1 in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 8
    Last Post: April 16th, 2005, 03:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •