Results 1 to 2 of 2

Thread: PID's Missing or am I missing something

  1. #1
    New Member
    Join Date
    Feb 2007
    Posts
    4

    Default PID's Missing or am I missing something

    Troubleshooting truck -

    Already have the ignition voltage reading that I cannot find.
    Seen the battery voltage - not sure if it is the same - I do not think it is.

    Also have the TCM on allison connected read PIDs in manual says to look at what the TCM is reporting fot the TFP E Solenoid Pressure switch.


    Any way of adding more into the PID list - Is there a way even to go to the console and ready what these are in the TCM / ECM.

  2. #2
    Senior Member lakingslayer's Avatar
    Join Date
    Dec 2005
    Posts
    180

    Default

    I do not think any of the solenoid pressure switches are available in EFILIve as of now. If you ask Ross and Paul they may be able to work something out. From what I understand it isn't that hard to add a PID as long as they know where to poke in the TCM/ECM.

Similar Threads

  1. Another missing PID
    By gmh308 in forum Black Box Logging
    Replies: 12
    Last Post: September 29th, 2009, 12:00 PM
  2. Missing VIN
    By 99STEPSIDE in forum FlashScan V2
    Replies: 9
    Last Post: February 11th, 2009, 02:30 PM
  3. E38 Missing tables? Or I'm missing something?
    By gmtech16450yz in forum E37, E38 & E67 PFI ECM's
    Replies: 5
    Last Post: January 7th, 2009, 02:28 PM
  4. Maybe i'm missing something but... (V2)
    By Chris81 in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: November 17th, 2006, 12:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •