Does anyone have the latest firmware for V1, mine has gone haywire and needs to be reflashed.
Does anyone have the latest firmware for V1, mine has gone haywire and needs to be reflashed.
1 7/8" American Racing Headers, 3" X pipe, 6" GHL Bullits ~ DONE, AEM Wideband~DONE, MTI R1 Cam~DONE, Mototron 60's~DONE, D1SC Stage II procharger~DONE, Alky Control Methanol Spray System~To do
Can't be done for a V1. If you have a V2 and you mis-typed the most current firmware is in the most recent EFILive program download.Originally Posted by JET LEE
Are you having connection problems, like computer doesn't always see the cable?
Ira
well.....it worked fine for a couple of months, now when I try to connect the console gives "ERROR unregistered interface some features have been disabled". Now all I can do is scan : (
I haven't changed anything in the software. I double checked my SN, KEY, issue date and type to verify that they were correct.
Then, I uninstalled the software including drivers and reinstalled everything....still same error message.
When I go to Tuning-Help-Flashscan V1 PCM Licensing, I get the following:
Flashscan SN: I get the correct SN followed by two strange looking charcters then USB
Type: Unknown
Firmware version: 99.2.17
Model: FSP
Firmware date: 18-Jan-2005
Reflash counter: -2080374781 (Really strange the other day it said 3 which is correct)
PCM Licenses 1 available 1 used (correct)
Has to be a hardware problem. Andrew is looking into it, just posted to see if anyone else had this issue.
Last edited by JET LEE; March 3rd, 2007 at 09:48 AM.
1 7/8" American Racing Headers, 3" X pipe, 6" GHL Bullits ~ DONE, AEM Wideband~DONE, MTI R1 Cam~DONE, Mototron 60's~DONE, D1SC Stage II procharger~DONE, Alky Control Methanol Spray System~To do
It basically won't be detected as a FlashScan interface as it seem the flash has some corruption.
Andrew
EFILive Crew