Results 1 to 1 of 1

Thread: Reading the P12 PCM

  1. #1
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default Reading the P12 PCM

    The reading and programming options have been in public beta for over a month now but many might not actually be aware of this.
    To ensure we get good coverage of all engine types used with this controller we request that you please send any .tun files you might read out of these PCM's to support@efilive.com
    You must be using V2 hardware to be able to read / program the P12 PCM.
    When you press the green icon in Tune, select the P12 from the drop down list. If you are unsure which PCM the vehicle is using try to locate the PCM in the engine bay and compare it to the picture shown at the top right of the read screen.
    If you select the wrong PCM type don't worry, you won't damage anything, the PCM will simply reject the bootloader and EFILive will give you an error message stating this.

    Select P12 PCM to read:
    Last edited by GMPX; March 18th, 2007 at 09:55 PM.
    I no longer monitor the forum, please either post your question or create a support ticket.

Similar Threads

  1. HELP - PCM DOA after just Reading it
    By Olympic Fox in forum Duramax LLY
    Replies: 8
    Last Post: September 27th, 2009, 12:14 AM
  2. v2.06.10 5/25/09 firmware/Reading
    By Cougar281 in forum FlashScan V2 BB Logging
    Replies: 18
    Last Post: June 9th, 2009, 08:51 AM
  3. Reading an E38 / E67 ECM
    By GMPX in forum E37, E38 & E67 PFI ECM's
    Replies: 26
    Last Post: June 6th, 2007, 06:02 PM
  4. Reading PCM
    By 91LS1S10 in forum Custom Operating Systems
    Replies: 9
    Last Post: October 21st, 2006, 06:52 AM
  5. reading pcm's
    By ace68 in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: September 3rd, 2005, 01:52 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •