Results 1 to 6 of 6

Thread: bench harness for ls2 and e38

  1. #1
    Lifetime Member minytrker's Avatar
    Join Date
    Jan 2006
    Posts
    1,332

    Default bench harness for ls2 and e38

    I have my bench harness for 99+ls1's that I made off the diagram on here and been using for a good while with great results. I finally got ahold of some wiring harness's and pcm's for ls2's and even a e38. How do i make bench harness's for those?

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    E38
    Black Connector:
    Pin 19 = Switched Ignition Voltage
    Pin 20 = Battery Voltage
    Pin 27 = GMLAN -
    Pin 28 = GMLAN +
    Pin 73 (the big Tab) = Ground

    E40
    Blue Connector:
    Pin 1 = GMLAN +
    Pin 2 = GMLAN -
    Pin 7 or 8 = Ground
    Pin 19 = Switched Ignition Voltage
    Pin 20 = Battery Voltage

    Note: The E40 wired up like that will also be good for the P12 (IL4&5) PCM.

    Cheers,
    Ross
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Lifetime Member minytrker's Avatar
    Join Date
    Jan 2006
    Posts
    1,332

    Default

    How do you hook it all up to the ODBII plug?

  4. #4
    Lifetime Member minytrker's Avatar
    Join Date
    Jan 2006
    Posts
    1,332

    Default

    Im still lost, can anyone help on making a bench harness?

  5. #5
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    The pinouts for the OBDII plug (the one on the vehicle) is shown in appendix B of the EFILive Scan Tool manual. Just match the signal descriptions that GMPX posted with the pins on the OBDII connector.

    Note: GMLAN+ is CAN High on the OBDII connector, GMLAN- is CAN Low on the OBDII connector.

    Regards
    Paul
    Before asking for help, please read this.

  6. #6
    Lifetime Member minytrker's Avatar
    Join Date
    Jan 2006
    Posts
    1,332

    Default

    Thanks alot, I got it now. I never knew that was even back there in the manual.

Similar Threads

  1. Bench Harness?
    By GAMEOVER in forum IL6,IL5,IL4 Atlas Engines - P12 PCM
    Replies: 3
    Last Post: January 31st, 2009, 10:33 AM
  2. LBZ/LLY Bench Harness
    By Dream8000 in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 2
    Last Post: February 14th, 2007, 02:13 AM
  3. bench harness
    By minytrker in forum General (Petrol, Gas, Ethanol)
    Replies: 6
    Last Post: June 15th, 2006, 04:09 AM
  4. Bench Harness
    By Biodiesel66 in forum Duramax LB7
    Replies: 1
    Last Post: May 3rd, 2006, 08:34 PM
  5. bench harness
    By madprof01 in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: September 21st, 2005, 02:25 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •