Convert 98 to 02

[ChipsByAl]

Yes Garry you can add the information to the Wiki.

When you write "Red C1-60 BRN, Blue C2-19 PNK, C2-58 PPL and C2-20 ORN remain in the same locations"

This means you don't have to do anything with these circuits. See the excel file for the "new" circuit location.

[Garry]

OK, understood ... I added the pins to the table I made in the Wiki, so anybody just doing pin by pin should get it right

[jnorris]

This is great news! What about the ECT gauge?

[edit]
Never mind....It will operate the same as it will still use the same sender and gauge cluster....

[jnorris]

OK, understood ... I added the pins to the table I made in the Wiki, so anybody just doing pin by pin should get it right

I am sorry but I do not understand "Wiki".

How do I fine the table you are talking about?


John

[jnorris]

I used the 2002 Camaro/Firebird OS 12212156 (available from http://www.holdencrazy.com) for the base file. I then used the fuel segment from the 2002 Express Van OS 12212156. Since the fuel tank and sender are different, I then copied the fuel system parameters, fuel gauge calibration and Convert sender to volume tables back from the Camaro/Firebird base file. I just looked and Tordne doesn't have the Express Van on his site. I will email him one.
Al

The 1998 F-body fuel tank holds 15.5 and the 99+ hold 16.8 gallons. Shouldn’t you use the stock 1998 calibration data in the 2002 flash?

[Garry]

I am sorry but I do not understand "Wiki".

How do I fine the table you are talking about?

http://gmtuning.info/wiki/index.php/98PCM

[jnorris]

http://gmtuning.info/wiki/index.php/98PCM

Thanks

[ChipsByAl]

The 1998 F-body fuel tank holds 15.5 and the 99+ hold 16.8 gallons. Shouldn’t you use the stock 1998 calibration data in the 2002 flash?

Good point, jnorris. The conversions I did were close enough just like that. You can definitely fine tune the fuel gauge better than my rough in.
Al

[Brains]

Wow, this is awesome!


What is meant by "TEST FIRST!" on that one pin though?

[ChipsByAl]

Sorry if I confused anyone. That was a note to me to check that circuit. It does work with the segment swap and update of Camaro/Firebird fuel parameters. I have changed the document for all who want the corrected version.
Al