Page 4 of 4 FirstFirst ... 234
Results 31 to 33 of 33

Thread: Convert 98 to 02

  1. #31
    Senior Member
    Join Date
    Apr 2007
    Posts
    194

    Default

    Quote Originally Posted by ChipsByAl
    I'm glad that I could be of help. What is the problem with the fuel gauge?
    I tried to copy the segment from the van, but that did not seem to work until I did a full reflash. It read backwards initially, so I reversed the numbers on the gauge calibration. Any other issues were a combo of a wire off in the harness (me) and trying to make it more accurate EX: changing the fuel tank size, using the 98 calibrations.

  2. #32
    Lifetime Member ChipsByAl's Avatar
    Join Date
    Feb 2006
    Posts
    618

    Default Updated file

    Hey guys, JNORRIS located an error in my Convert98a.doc for this conversion. It involves a jumper wire from one connector of the 1998 PCM to the other. This jumper can be removed. The first document had a typo on line 35. It has now been corrected on my web site. I apologize for any inconveniences it may have caused. If you have one end of this wire still in your Blue connector terminal 35 you can safely remove it or keep it from harms way.
    Al

    PS. I have also enclosed the new file.
    Attached Files Attached Files
    "Trash that carb and get Injected!"

  3. #33
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Al, thanks for the update.

Page 4 of 4 FirstFirst ... 234

Similar Threads

  1. can anyone convert ant hpt file into efi?help,help
    By z28ls1818 in forum Gen III V8 Specific
    Replies: 23
    Last Post: December 19th, 2009, 09:10 AM
  2. help! convert to ETC/drive by wire
    By DURAtotheMAX in forum Gen III V8 Specific
    Replies: 25
    Last Post: June 17th, 2009, 08:46 PM
  3. Convert ETC to cable TB
    By xtreme in forum Gen III V8 Specific
    Replies: 15
    Last Post: March 23rd, 2009, 10:52 PM
  4. Anyone willing to convert my PLX to serial???
    By exploder in forum General (Petrol, Gas, Ethanol)
    Replies: 9
    Last Post: November 16th, 2008, 04:51 PM
  5. LS1 Edit convert... first post with Q's
    By Chicago Z06 in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: May 15th, 2005, 08:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •