Ok. The frustration has started again already. I've managed to get most of my VE dialed in except the lower MAP regions. 15kpa row tunes out fine. 40kpa/up tunes fine from 1600rpm's/up. 400rpm-1200rpm/20kpa-35kpa always reads rich. Anywhere from .87-.94 no matter how many changes until it gets to where I stop figuring something has got to be lean. The map can go from 33.9 in the 15kpa/2000rpm cell to 21 in the 20kpa/2000rpm cell and still read rich. This process seems to follow suit throughout the regions mentioned above. Has anyone had this happen and if so what is the proper approach to tuning these areas right?