Results 1 to 7 of 7

Thread: boost a/f

  1. #1
    Member
    Join Date
    Mar 2007
    Posts
    94

    Default boost a/f

    Ok so i am cos5..3bar. Under boost it says its commanding 8.5-9 afr...where is this command coming from? my pe is set to all 11.7

  2. #2
    Senior Member
    Join Date
    Mar 2006
    Posts
    180

    Default

    b3647

  3. #3
    Member
    Join Date
    Mar 2007
    Posts
    94

    Default

    hmmm it says 11.5 in the 100kpa row.....anywhere else

  4. #4
    Senior Member
    Join Date
    Mar 2006
    Posts
    180

    Default

    Quote Originally Posted by Cablebandit
    hmmm it says 11.5 in the 100kpa row.....anywhere else

    Check the ECT modifier. Should be 1.0 65C and up.

    Post a log.

  5. #5
    Member
    Join Date
    Mar 2007
    Posts
    94

    Default

    emailed to ya tom THANKS!!

  6. #6
    Member
    Join Date
    Mar 2007
    Posts
    94

    Default

    a0008 is 1.0

  7. #7
    Member
    Join Date
    Mar 2007
    Posts
    94

    Default

    think i found it...3618 has some RICH SETTINGS that seem to correspond to what i am seeing...yours is 11.7 Tom so i will change that. Does look to be the prob.

Similar Threads

  1. What AFR in Boost?
    By zapp168 in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 6
    Last Post: July 24th, 2007, 12:03 AM
  2. Use MAF for off boost/2 Bar SD when in boost
    By Earl H in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 26
    Last Post: May 24th, 2007, 11:58 AM
  3. Boost and EGT's
    By minytrker in forum Duramax LB7
    Replies: 5
    Last Post: February 14th, 2007, 02:41 AM
  4. Can you log boost?
    By AustinL911A in forum General
    Replies: 9
    Last Post: January 5th, 2006, 06:55 AM
  5. What happens when you go into boost?
    By hpcubed in forum General (Petrol, Gas, Ethanol)
    Replies: 18
    Last Post: March 29th, 2005, 04:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •