Ok so i am cos5..3bar. Under boost it says its commanding 8.5-9 afr...where is this command coming from? my pe is set to all 11.7
Ok so i am cos5..3bar. Under boost it says its commanding 8.5-9 afr...where is this command coming from? my pe is set to all 11.7
b3647
hmmm it says 11.5 in the 100kpa row.....anywhere else
Originally Posted by Cablebandit
Check the ECT modifier. Should be 1.0 65C and up.
Post a log.
emailed to ya tom THANKS!!
a0008 is 1.0
think i found it...3618 has some RICH SETTINGS that seem to correspond to what i am seeing...yours is 11.7 Tom so i will change that. Does look to be the prob.