Ok , what is the pickle here , I just went over the AutoVE tutorial in 7.4.2 , and the COS3 B3647 values are quite different in the new tutorial .
At 95 and 100 Kpa in the old tutorial the values were 13.8 (95 Kpa) and 12.9 the first 4 cells and then 12.5 the rest (100 Kpa) respectively , the other values were 14.7 not 14.63 because that if I remember right 14.63 puts you in semi-open loop mode still using the O2 sensors .
So anyone who used the old tutorial is going to be quite off or is the new one ?