Results 1 to 3 of 3

Thread: Boost Timing Table

  1. #1
    Junior Member
    Join Date
    Jun 2005
    Posts
    13

    Default Boost Timing Table

    Hi,
    What pid to log in the scan tool to see the spark retard from the {A0010} Boost Timing Table?
    MarcinK

  2. #2
    Senior Member
    Join Date
    Jul 2005
    Posts
    164

    Default

    Ignition Timing Advance for#1 Cylinder, SAE.SPARKADV works for me. I can see the 10deg I pull everywhere above 105kpa.
    Y2K C5, M6, LS6 intake, Kooks LT headers, High flow cats, 216/224 113 LSA, 5.3 Stage II heads. STS twins. COS

  3. #3
    Junior Member
    Join Date
    Jun 2005
    Posts
    13

    Default

    It seems that EST_ECT_DMA pid shows the spark retard introduced by {A0010} Boost Timing Table...
    I logged some serious retard on this pid and tried to match it with the {B5910} Spark ECT Table but I could not find any connection. Then checking on the graph I noticed it is directly connected with Boost Timing Table.
    Just to let you know.
    MarcinK

Similar Threads

  1. DSP5 No timing or Boost
    By Truckguy in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 5
    Last Post: February 5th, 2010, 02:17 AM
  2. need to retard timing under boost
    By JOHNGEAR in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 5
    Last Post: November 8th, 2008, 01:07 AM
  3. Boost Timing Table
    By Forcefedperformance in forum Gen IV V8 Specific
    Replies: 1
    Last Post: July 9th, 2008, 10:43 AM
  4. 2/3 Bar Tuning: Boost Timing Table ?
    By Earl H in forum General (Petrol, Gas, Ethanol)
    Replies: 14
    Last Post: May 11th, 2008, 12:03 AM
  5. Boost timing PID?
    By TNT76 in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 1
    Last Post: June 24th, 2007, 07:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •