Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22

Thread: More RR problems 3rd one died after 30 sec

  1. #11
    Lifetime Member
    Join Date
    Aug 2005
    Posts
    710

    Default

    No problems here. Have it semi-permanently mounted in my Trans Am, but have taken it out to use on other vehicles without any problems.

    Justin

  2. #12
    Lifetime Member minytrker's Avatar
    Join Date
    Jan 2006
    Posts
    1,332

    Default

    I have been trieing stuff off and on today. I tired a differnt laptop, tried the wireless, tried wrapping in foil and it still doesnt work. I really think the thing crapped out. It did work without doing anything to it, then it quit. I didnt change anything, it just wont work.

  3. #13
    Lifetime Member Doc's Avatar
    Join Date
    Oct 2005
    Posts
    744

    Default

    Wired and wireless? Were the failures on wired or wireless, or both? I am sorry for what must seem like another "been there done that" question but I would hope your situation just ends up being a mathmatical/statiscal anonomly.

    2000 Silverado Full Size 4x4: Forged 6.2, H/C F1R Procharger
    98A4 Z28: 02 PCM H/C Forged 347, 9" Moser 3.73
    V1 V2 99+up RR COS #5 OLSD Dual Stg N20
    www.efialchemy.com
    www.greatamericancarwar.com

  4. #14
    Senior Member
    Join Date
    Jun 2006
    Posts
    144

    Default

    It seems like I have confused mine everyonce in a while. Usually letting it sit out of a car for 30 minutes brings it back to life.

    i'm honestly pretty hard on my equipment as I also do this for a living. The roadrunner has been damn reliable for me. I have one of the very first ones and the only thing that has ever broke is the usb cable and that was my fault.

  5. #15
    Member VT LS1 NZ's Avatar
    Join Date
    Apr 2003
    Posts
    79

    Default

    When you plug the RR into your laptops USB does it activate or does it search for hardware?
    If your tried wireless then it won't be the cable.
    If youve checked that there is power to RR then the RR at fault.
    There was an issue early on that was fixed by a following certain steps(I'll have to look for them) or leaving the power off the RR over night.

    Are you using an extra length attached to your USB cable?
    I had an issue on the weekend with the car I was tunning I added an extra length to the cable and I couldn't talk to the RR.Mind you that was fixed my closing everything down & restarting.
    If you are doing that this could be the cause of all your problems.
    856RWHP 408 Supercharged LS1 Holden Commodore.

  6. #16
    Lifetime Member minytrker's Avatar
    Join Date
    Jan 2006
    Posts
    1,332

    Default

    Im using the stock cable. I am going to try the wireless, since I have it sitting here. I have been working with Craig to get ths sorted out, his customer service is top notch and he stands behind his products.

  7. #17

    Default

    Lorenz,

    When you get back, I've got something else I want to try.

    It does sound like you're having a noise susceptibility problem. It is something that might be addressed with something as simple as a modified interconnect cable. I'm going to do some testing on my side and see if I can reproduce and then subsequently and brutally destroy the issue.

    We'll continue working with you (and anyone else who ever has any issue) to get your Roadrunner to be an 'Old Faithful' unit. You should be spending your time tuning cars and not troubleshooting hardware. Thank you very much for your patience though, and apologies for any inconvenience.

    Best regards,
    -Craig

  8. #18
    Lifetime Member minytrker's Avatar
    Join Date
    Jan 2006
    Posts
    1,332

    Default

    Thanks Craig,

    The surgery went well so hopfully in about a week I will be able to get back with you. I will give you a call when I up and going again.

  9. #19
    Lifetime Member minytrker's Avatar
    Join Date
    Jan 2006
    Posts
    1,332

    Default

    Well it works now with the wireless thanks to Craig!!!!! It still doesnt work with the usb but I can live with that if the wireless works. I only used it today for a few mins but hopfully tomorrow I can try the rr out with the wireless some more.

  10. #20
    Lifetime Member
    Join Date
    Apr 2003
    Posts
    379

    Default

    Quote Originally Posted by minytrker
    Well it works now with the wireless thanks to Craig!!!!! It still doesnt work with the usb but I can live with that if the wireless works. I only used it today for a few mins but hopfully tomorrow I can try the rr out with the wireless some more.
    HAd similar issues with the USB cable, since converting to wireless I havent had a failure , the only downside is not beign able to suck the tune out of the RR when wireless and the wireless dropping out when restartign the car , if you try and make a change then it corrupts the sram and a full flash fixes it once the wireless connection is remade.

    I wouldnt tune without the road runner these days - even with some of its minor quirks the customer service is great and the unit is indispensible.

Page 2 of 3 FirstFirst 123 LastLast

Similar Threads

  1. RR Died today
    By Highlander in forum RoadRunner Real-Time PCM Emulator
    Replies: 11
    Last Post: November 19th, 2009, 06:40 PM
  2. AD2 died
    By mr.prick in forum External A/D inputs
    Replies: 9
    Last Post: May 27th, 2009, 02:46 PM
  3. Laptop Died
    By zapp168 in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: July 31st, 2007, 10:12 AM
  4. RR died
    By minytrker in forum RoadRunner Real-Time PCM Emulator
    Replies: 12
    Last Post: June 7th, 2007, 02:16 AM
  5. Died around 4200rpm
    By hquick in forum General (Petrol, Gas, Ethanol)
    Replies: 16
    Last Post: April 19th, 2007, 11:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •