Results 1 to 4 of 4

Thread: Is the tow/haul button considered "performance" in efilive?

  1. #1
    Junior Member
    Join Date
    Apr 2007
    Posts
    28

    Default Is the tow/haul button considered "performance" in efilive?

    Like the question ask. I see the column called performance in a couple of different sections in the software. Just trying to figure out how to make my tow/haul button a haul/ass button.
    Thanks

  2. #2
    EFILive Reseller kbracing96's Avatar
    Join Date
    Sep 2005
    Posts
    584

    Default

    Yes, tow/haul = performance. It's just transmission settings though.
    01 ECSB 1/2 ton 4x4 Forged 5.7 LS1 GMC

    Custom KBracing front mounted, BW S480, intercooled turbo


  3. #3
    Junior Member
    Join Date
    Apr 2007
    Posts
    28

    Default

    Quote Originally Posted by kbracing96
    It's just transmission settings though.
    That is perfect then. Exactly what I was hoping for. This is going to be fun!

    So, what have others done with their tow/haul button? I was going to make mine more aggressive. Firmer shifts, more aggressive TCC settings, hold gears longer at WOT and part throttle, ect, ect

  4. #4
    Lifetime Member ChipsByAl's Avatar
    Join Date
    Feb 2006
    Posts
    617

    Default

    I have used it for low traction conditions on higher powered vehicles. It can be easily adapted to other vehicles that don't have the switch. Simply put all of the 1-> 2 shift points (D0901) near the WOT actual shift MPH and you can feather the throttle without any concerns of it short shifting to second gear. It will also keep you from making aggresive downshifts back to first if it does shift to second.
    Al
    "Trash that carb and get Injected!"

Similar Threads

  1. P2563 code "Turbocharger Boost Control Position Sensor Performance"
    By Truckin Stuff in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 0
    Last Post: December 3rd, 2009, 12:11 PM
  2. Tow/Haul and/or Performance button
    By nonnieselman in forum Gen III V8 Specific
    Replies: 7
    Last Post: August 5th, 2009, 01:41 AM
  3. EFILive "Classic"/"Legacy"/"Historic"?
    By emarkay in forum FlashScan V2
    Replies: 6
    Last Post: November 2nd, 2008, 01:48 AM
  4. "PCM is in an Unkown State" & "Reflash Failed"
    By foxySS in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: September 8th, 2006, 11:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •