Results 1 to 10 of 27

Thread: Use MAF for off boost/2 Bar SD when in boost

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member
    Join Date
    Nov 2004
    Posts
    58

    Default Use MAF for off boost/2 Bar SD when in boost

    Guys,

    I have a TT all bore '03 Z06. It currently runs high 9's at 144+mph. I want to get a bit more aggressive (i.e. turn up the boost). My car is currently tuned with the MAF. My tuner is responsible for the progress thus far. I have tuned my car in the past and I am slowly getting back into the swing of things. Now, I have just recently loaded in the COS. I have a 2 bar map sensor on order and will be installing it asap. I am getting my tune ready for 2 bar tuning(see attachment). My question is, can I use the current MAF tune for 105kpa and below and the 2 bar SD tune above that? If so, could I get some advice on how to set it up?

    I am currently reading as much as i can while awaiting responses to this thread. Thanks in advance for the help.
    Attached Files Attached Files

Similar Threads

  1. What AFR in Boost?
    By zapp168 in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 6
    Last Post: July 24th, 2007, 12:03 AM
  2. Boost and EGT's
    By minytrker in forum Duramax LB7
    Replies: 5
    Last Post: February 14th, 2007, 02:41 AM
  3. Can you log boost?
    By AustinL911A in forum General
    Replies: 9
    Last Post: January 5th, 2006, 06:55 AM
  4. What happens when you go into boost?
    By hpcubed in forum General (Petrol, Gas, Ethanol)
    Replies: 18
    Last Post: March 29th, 2005, 04:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •