Results 1 to 5 of 5

Thread: Pin lock

  1. #1
    Lifetime Member vortecfcar's Avatar
    Join Date
    Apr 2007
    Posts
    536

    Default Pin lock

    Is there a part number for this. Mine broke while prying it from the connector. Any help would be great!

  2. #2
    Lifetime Member ChipsByAl's Avatar
    Join Date
    Feb 2006
    Posts
    618

    Default

    Can you post a pic, or more details?
    "Trash that carb and get Injected!"

  3. #3
    Lifetime Member vortecfcar's Avatar
    Join Date
    Apr 2007
    Posts
    536

    Default

    Its the teal colored plastic piece. It's U shaped. I'll call the dealer on tuesday.

    I got a little aggressive while trying to pry it out to install the DSP5 switch and broke the end off. The two legs are still in the connector so the pins should be fine, I just want to have a new one so everything is stock appearing.

  4. #4
    Lifetime Member ChipsByAl's Avatar
    Join Date
    Feb 2006
    Posts
    618

    Default

    PCM Connector C1 12191489, this is my best guess for the part number. Good luck,
    AL
    "Trash that carb and get Injected!"

  5. #5
    Lifetime Member vortecfcar's Avatar
    Join Date
    Apr 2007
    Posts
    536

    Default

    thanks Al!

Similar Threads

  1. lOCK pcm
    By odd boy in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: September 14th, 2009, 08:12 AM
  2. TCC lock up
    By jegauto in forum Allison 5 & 6 Speed
    Replies: 6
    Last Post: October 6th, 2008, 03:57 PM
  3. tcc lock up to soon
    By kjohns18 in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 0
    Last Post: June 5th, 2008, 02:32 PM
  4. Need to lock e38
    By CBM in forum E37, E38 & E67 PFI ECM's
    Replies: 1
    Last Post: December 3rd, 2007, 03:41 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •