Results 1 to 7 of 7

Thread: Adding logs together?

  1. #1
    Lifetime Member hquick's Avatar
    Join Date
    Jan 2007
    Posts
    1,371

    Default Adding logs together?

    I searched but couldn't find anything?
    Today I ran a long log and 'ran out of frames?' half way.
    I pulled over, kept the truck running, extended the No. of frames allowed to 100 (x1000) instead of the 50 and started logging again.
    Is it possible to add those two logs together?
    Howard

    YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
    MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
    DUCT TAPE.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.


    98 K1500 'HOLDEN' Suburban.
    Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit

  2. #2
    EFILive Reseller kbracing96's Avatar
    Join Date
    Sep 2005
    Posts
    584

    Default

    Not right now. Paul said we will be able to with the V8 version of the software when it get done, I believe.
    01 ECSB 1/2 ton 4x4 Forged 5.7 LS1 GMC

    Custom KBracing front mounted, BW S480, intercooled turbo


  3. #3
    Lifetime Member hquick's Avatar
    Join Date
    Jan 2007
    Posts
    1,371

    Default

    Thanks KB
    Howard

    YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
    MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
    DUCT TAPE.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.


    98 K1500 'HOLDEN' Suburban.
    Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit

  4. #4
    Lifetime Member
    Join Date
    Aug 2005
    Posts
    710

    Default

    Quote Originally Posted by hquick
    Thanks KB
    If you're a programmer, the Flashscan API will allow for you to do this. I recall a few people discussing doing this quite a while back.

    Justin

  5. #5
    Lifetime Member SSpdDmon's Avatar
    Join Date
    Jun 2005
    Posts
    1,558

    Default

    I know I made a quick spreadsheet in excel in the past for adding MAF logs or VE logs together. You just need to create some weighted averages to add them together.

    Example....

    Log 1 -
    BEN for 50kPa at 1200rpm: 1.01
    Cell count 504

    Log 2 -
    BEN for 50kPa at 1200rpm: 1.025
    Cell count 146

    Total cell counts for that data point: 650

    Equation: (1.01*(504/650))+(1.025*(146/650))=1.01337

    A little copy/paste of the equation to the right cells and that's it.

  6. #6
    Lifetime Member hquick's Avatar
    Join Date
    Jan 2007
    Posts
    1,371

    Default

    Thanks....I might give it a try later. That's handy to know.
    Howard

    YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
    MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
    DUCT TAPE.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.


    98 K1500 'HOLDEN' Suburban.
    Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit

  7. #7
    Senior Member
    Join Date
    Jun 2007
    Posts
    133

    Default

    Could be nice to join multiple logs when doing an autove tuning and you dont have the time to do on long log but rather several throughout a day or two.
    9.8@150 . LQ4 Turbonetics Billet 7575@18psi, 6 speed, non-intercooled with meth. Speed Density, open loop, no PE.

Similar Threads

  1. Adding O2's
    By jsm00z28ss in forum Gen III V8 Specific
    Replies: 28
    Last Post: December 30th, 2009, 08:34 PM
  2. Adding headers + O2
    By BRD-PREY in forum Gen III V8 Specific
    Replies: 15
    Last Post: July 28th, 2009, 09:12 AM
  3. COS#3 adding timing
    By minytrker in forum Custom Operating Systems
    Replies: 3
    Last Post: November 26th, 2008, 04:39 AM
  4. Adding fuel
    By Lennart in forum General (Diesel)
    Replies: 1
    Last Post: January 18th, 2006, 02:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •