Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: 2003 Ls7

  1. #1
    Lifetime Member jfpilla's Avatar
    Join Date
    Apr 2003
    Posts
    666

    Default 2003 Ls7

    I don't think I've seen anything this pretty. Williams Performance did the install. The only mods are A.R. Headers and a Vararam. It's otherwise completely stock. It's converted to wet sump.
    The car drives like a dream and has lots of B_ _ _ _S. The torque is great so I've been able to lower the TC lockup because of it. You can tell I'm really stoked.
    My 364 will go up for sale next week when I can get some pictures.

    http://share.shutterfly.com/action/w...8AcuWzhq1csm9I
    Last edited by jfpilla; May 14th, 2007 at 03:51 PM.
    2003 red vert
    Mods:
    LS7 crate engine, wet sump, 24xx reluctor
    LPE 100mm MAF
    Vararam, cold air intake and bridge
    RPM Level 6/4L60e trans
    3.42 gears
    Yank SS3600
    1-7/8" AR headers
    Z06 exhaust
    470rwhp 437rwtq
    1/8th mi-1.526-60'-6.862-1/8th-@100.74mph

  2. #2

    Default

    Joe,

    That new motor has to feel real good with that A4! Must have some mean yank.

    Get some miles on it and get back to the track!

    Howard

    www.redline-motorsports.net

    1-954-703-5560

    2006 ZO6 895/866 with APS TT
    2010 SSRS Camaro HTR-900TT (798/801)
    2011 HTR-850R Camaro
    2012 ZL1 Auto (10.33@135 MPH) Video Here!

  3. #3
    Lifetime Member jfpilla's Avatar
    Join Date
    Apr 2003
    Posts
    666

    Default

    Joel asks: is this the first LS7 A4?
    2003 red vert
    Mods:
    LS7 crate engine, wet sump, 24xx reluctor
    LPE 100mm MAF
    Vararam, cold air intake and bridge
    RPM Level 6/4L60e trans
    3.42 gears
    Yank SS3600
    1-7/8" AR headers
    Z06 exhaust
    470rwhp 437rwtq
    1/8th mi-1.526-60'-6.862-1/8th-@100.74mph

  4. #4
    Guess who's back!!!! Black02SS's Avatar
    Join Date
    Jan 2004
    Posts
    1,355

    Default

    Sounds like magazine material.

  5. #5
    Lifetime Member jfpilla's Avatar
    Join Date
    Apr 2003
    Posts
    666

    Default

    Quote Originally Posted by Redline Motorsports
    Joe,

    That new motor has to feel real good with that A4! Must have some mean yank.

    Get some miles on it and get back to the track!

    Howard
    I'm going easy with it for break-in but it does pull hard. I increased the TCC PWM and TCC pressure and lowered Lockup mph. With 3.90's and the old engine the rpm's between 4th and lockup were a little annoying. But that's gone. Can't wait to race it.
    2003 red vert
    Mods:
    LS7 crate engine, wet sump, 24xx reluctor
    LPE 100mm MAF
    Vararam, cold air intake and bridge
    RPM Level 6/4L60e trans
    3.42 gears
    Yank SS3600
    1-7/8" AR headers
    Z06 exhaust
    470rwhp 437rwtq
    1/8th mi-1.526-60'-6.862-1/8th-@100.74mph

  6. #6
    Lifetime Member jfpilla's Avatar
    Join Date
    Apr 2003
    Posts
    666

    Default

    Quote Originally Posted by Black02SS
    Sounds like magazine material.
    That would be really cool. How does that happen?
    2003 red vert
    Mods:
    LS7 crate engine, wet sump, 24xx reluctor
    LPE 100mm MAF
    Vararam, cold air intake and bridge
    RPM Level 6/4L60e trans
    3.42 gears
    Yank SS3600
    1-7/8" AR headers
    Z06 exhaust
    470rwhp 437rwtq
    1/8th mi-1.526-60'-6.862-1/8th-@100.74mph

  7. #7
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by jfpilla
    That would be really cool. How does that happen?
    Contact them (GMHTP, or others) and show them lots of pic of your car, engine with an explanation of the swap.
    Present it well, clearly and concisely.

  8. #8
    Lifetime Member jfpilla's Avatar
    Join Date
    Apr 2003
    Posts
    666

    Default

    Quote Originally Posted by joecar
    Contact them (GMHTP, or others) and show them lots of pic of your car, engine with an explanation of the swap.
    Present it well, clearly and concisely.
    I'll do it. Now I have to clean the car.
    2003 red vert
    Mods:
    LS7 crate engine, wet sump, 24xx reluctor
    LPE 100mm MAF
    Vararam, cold air intake and bridge
    RPM Level 6/4L60e trans
    3.42 gears
    Yank SS3600
    1-7/8" AR headers
    Z06 exhaust
    470rwhp 437rwtq
    1/8th mi-1.526-60'-6.862-1/8th-@100.74mph

  9. #9
    Lifetime Member
    Join Date
    Dec 2005
    Posts
    358

    Default

    sounds kool i just did a ls7 build.ls7 heads, intake with world block and bigger cam.made 600 on pump gas i think it was 560 tk.just done the final car tune in a 02 vett drives sweet used custom operating system customer said other motor tuned from some else never had that much driveabiltiy.

  10. #10
    Lifetime Member jfpilla's Avatar
    Join Date
    Apr 2003
    Posts
    666

    Default

    69camaro5speed
    Sounds like a really sweet motor. Good luck.
    Joe
    2003 red vert
    Mods:
    LS7 crate engine, wet sump, 24xx reluctor
    LPE 100mm MAF
    Vararam, cold air intake and bridge
    RPM Level 6/4L60e trans
    3.42 gears
    Yank SS3600
    1-7/8" AR headers
    Z06 exhaust
    470rwhp 437rwtq
    1/8th mi-1.526-60'-6.862-1/8th-@100.74mph

Page 1 of 2 12 LastLast

Similar Threads

  1. 2003+ pcm
    By Harrismarine in forum Gen III V8 Specific
    Replies: 9
    Last Post: September 30th, 2009, 05:32 PM
  2. Tune for my 2003 GMC Sierra 5.3L?
    By LM7Tuner in forum Gen III V8 Specific
    Replies: 6
    Last Post: September 8th, 2009, 06:11 AM
  3. 2003 h2 and 04 saturn ion
    By blackdeath in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: February 17th, 2009, 05:09 PM
  4. 2003
    By jay p in forum Duramax LB7
    Replies: 3
    Last Post: April 13th, 2006, 10:28 AM
  5. 2003 Silverado OS upgrade
    By John in forum General (Petrol, Gas, Ethanol)
    Replies: 13
    Last Post: October 3rd, 2005, 02:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •