Results 1 to 3 of 3

Thread: USB Drivers - Checking

  1. #1
    Junior Member
    Join Date
    Dec 2005

    Default USB Drivers - Checking

    We are often told to (with latest downloads or people with problems) check that we have the latest USB Drivers For EFI, how can you do this? something like when we go to help: about for the EFI build No's.
    04.5 GMC 2500HD SLE D/A 4wd ExCab Shtbox Blue

  2. #2
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006


    plug in your v1 or v2 witch ever you have> system> hardware>
    device manager> usb controllers then select the driver.
    go from there.
    usually we are told to uninstall old driver and install new.

  3. #3
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004


    Quote Originally Posted by mr.prick
    usually we are told to uninstall old driver and install new.
    Usually quicker and more reliable than trying to determine a peculiar fault with a driver installation, given the remoteness and all
    EFILive Crew

Similar Threads

  1. checking wideband accuracy with the narrowband?
    By ryans1000 in forum General (Petrol, Gas, Ethanol)
    Replies: 11
    Last Post: December 4th, 2009, 07:59 PM
  2. Checking TC and TF
    By Kurtomac in forum Gen III V8 Specific
    Replies: 1
    Last Post: February 7th, 2009, 02:16 AM
  3. Checking out tune w/o WBO2?
    By Garry in forum Gen III V8 Specific
    Replies: 5
    Last Post: November 30th, 2007, 12:18 PM
  4. checking my understanding (2bar and maf)
    By SScarTuning in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 9
    Last Post: October 27th, 2007, 02:25 PM
  5. Newb checking in!
    By Kevin Doe in forum Lounge
    Replies: 3
    Last Post: October 1st, 2007, 03:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts