went to the dyno look at my log

[warscout2]

if you guys would take a look at my log and give me any tips or help?
i was a bit sad about my low numbers 304 hp /303 tq
this is the first time i put it on the dyno and would like to now fully tune my car for power.


car has long tube headers off road y pipe stock catback, lid, and it has the 2002 os on a 2000 car

[JezzaB]

if you guys would take a look at my log and give me any tips or help?
i was a bit sad about my low numbers 304 hp /303 tq
this is the first time i put it on the dyno and would like to now fully tune my car for power.


car has long tube headers off road y pipe stock catback, lid, and it has the 2002 os on a 2000 car

Next time select a max of 24 channels mate and it will make it 10fps and update faster.

Good luck with it,

Jez

[SSpdDmon]

Did you use the '02 timing tables or the '00 timing tables. It looks like the timing is low - like you used the '02 tables, which are too low for '00.

[warscout2]

I think i might have used the 02 timing tables i downloaded it from holdencrazy i think it was this one im not sure http://www.holdencrazy.com/EFILive/T...t/00000019.tun that is a stock 99 migrated to 2002
When i get home i will download my tune right now
then upload that and my stock tune.

[warscout2]

ok so i went home and the first tune is the one im running and the secound one is my tune from when the car was stock.

i dont think i brought over the charts from my tune when i switched can everyone take a look and see what you think?
also does it look like i could have hurt anything running the new tune?