Results 1 to 3 of 3

Thread: Tuning Spark Advance

  1. #1
    Junior Member
    Join Date
    Aug 2006
    Posts
    33

    Default Tuning Spark Advance

    Does anyone have any links to some useful Spark Advance tuning information?

    I've read where some people just keep giving the car advance, until there is knock retard detected, the back it off a couple degrees.

    I've also read where this is not the recommended approach.

  2. #2
    Lifetime Member
    Join Date
    Jul 2004
    Posts
    640

    Default

    I believe the optimal solution is to put it on a dyno while holding the throttle and RPM constant and then adjust the spark for peak torque. Possible with a RoadRunner and a dyno if that's something you can do.

    Ira

  3. #3
    Lifetime Member
    Join Date
    Jan 2007
    Posts
    298

    Default

    I think you can do it with any dyno that has a speed hold mode. Use the LS1 controls to up and down the timing and look at the dyno numbers to see when it stops making power....

    Of course, dyno runs are hard on your motor!

Similar Threads

  1. 98 350, spark advance?
    By 06bowtie_guy in forum Vortec V6/V8 Specific
    Replies: 5
    Last Post: December 7th, 2009, 09:23 PM
  2. Spark Advance vs. Gear or MPH
    By bobbycollier in forum Custom Operating Systems
    Replies: 5
    Last Post: November 24th, 2009, 12:46 PM
  3. Help my spark advance is too high
    By Big Block in forum Custom Operating Systems
    Replies: 6
    Last Post: April 25th, 2008, 04:48 PM
  4. Another Spark Advance Question
    By Gelf VXR in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: March 22nd, 2008, 04:35 AM
  5. Why so much spark advance?
    By Spdfrk1990 in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: June 10th, 2007, 07:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •