Results 1 to 4 of 4

Thread: New part number for E67 ecm?

  1. #1
    Lifetime Member
    Join Date
    Jan 2004
    Posts
    232

    Default New part number for E67 ecm?

    The part number for the E67 ECM in the thread below doesn't seem to work anymore. Is there a new part number you can post please?

    http://forum.efilive.com/showthread.php?t=4810

    Thanks

  2. #2
    EFILive Reseller wait4me's Avatar
    Join Date
    Aug 2004
    Posts
    1,348

    Default

    How many are you needing? I have several here.
    "If you can leave a black mark on the pavement, from the exit of one corner to the braking point of the next one, you have enough horsepower."

  3. #3
    Lifetime Member
    Join Date
    Jan 2004
    Posts
    232

    Default

    That's ok Jesse. I just wanted to check and see what vehicles they were in.

    Thinking about a 6L80E swap into a '07 truck that has the 4L60E.

    It seems that the '07 Sierra Denali with the 6L80E and some of the regular '07 1500s with the 4L60E share the same E38 ECM so that would make life a little easier doing the swap I imagine.

  4. #4
    Senior Member PSWired's Avatar
    Join Date
    Jan 2005
    Posts
    109

    Default

    Any update on putting a 6L80e behind a Gen IV V8 originally equipped with the 4L60e? Using an E38 ECM...
    1995 GMC Yukon 4WD 4DR
    5.3 "LMG" engine: E85 with AFM
    6L80e 6 speed automatic transmission

Similar Threads

  1. Injector part number
    By GMPX in forum Gen III V8 Specific
    Replies: 3
    Last Post: June 23rd, 2009, 12:32 AM
  2. Corvette Servo part number???
    By ssvolvo in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 3
    Last Post: August 3rd, 2008, 11:21 PM
  3. 06 LBZ PCM Part Number
    By SSTuner in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 2
    Last Post: October 17th, 2007, 10:42 PM
  4. For Sale: New 512 kB PCM - Part Number 12200411
    By SinisterSS in forum General (Petrol, Gas, Ethanol)
    Replies: 6
    Last Post: March 27th, 2006, 12:26 PM
  5. Part number for 2 pin Analog I/F
    By ArKay99 in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: November 16th, 2005, 03:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •