Results 1 to 7 of 7

Thread: Efi Live wrote and now hypertech is screwed

  1. #1
    New Member
    Join Date
    Jun 2007
    Posts
    6

    Default Efi Live wrote and now hypertech is screwed

    Is there any way besides a tech 2 to trick a hypertech into thinking the car was reflashed at the dealer. I thought the stupid hypertech was deprogramed before I wrote on the cpu and now the thing won't go back to stock. Any one have any ideas? Does Efi log something on the computer that the hypertech knows that it isn't stock programmning?

  2. #2
    Lifetime Member Chuck CoW's Avatar
    Join Date
    Feb 2006
    Posts
    471

    Default There are lots of ways to tell......

    Quote Originally Posted by rzuff
    Is there any way besides a tech 2 to trick a hypertech into thinking the car was reflashed at the dealer. I thought the stupid hypertech was deprogramed before I wrote on the cpu and now the thing won't go back to stock. Any one have any ideas? Does Efi log something on the computer that the hypertech knows that it isn't stock programmning?

    There are lots of ways to tell...... but, one that's tough to mess with on our level is the FLASH COUNTER.....

    It dosen't matter how "stock" the tune is....If the PCM shows that it's been flashed more times than it thinks it should have been.....you're screwed....

    I don't know exactly how they test....But, that's how I would do it.....


    Chuck CoW
    CoW BOOSTER! Electronic Throttle Enhancement.

    - CLICK HERE NOW FOR MORE INFORMATION! -

    VARARAM, EDELBROCK, AMERICAN RACING HEADERS, BAER BRAKES, BORLA, EFI Live, Magnuson,
    COMP Cams, PROCHARGER, PRO TORQUE, PHADT Racing, INNOVATORS WEST, and more.



  3. #3
    Lifetime Member ChipsByAl's Avatar
    Join Date
    Feb 2006
    Posts
    618

    Default

    Did you change the operating system or any of the calibration ID's since you last used the programmer? If so, you should program the PCM back to that state.
    Al
    "Trash that carb and get Injected!"

  4. #4
    New Member
    Join Date
    Jun 2007
    Posts
    6

    Default

    Quote Originally Posted by ChipsByAl
    Did you change the operating system or any of the calibration ID's since you last used the programmer? If so, you should program the PCM back to that state.
    Al
    no I only changed the CAGS

  5. #5
    Senior Member
    Join Date
    Oct 2006
    Posts
    197

    Default

    Back in the Dark Ages, I had a dealer reflash done, and it rendered the Hypertech I bought for my gear change useless.

  6. #6
    Lifetime Member Chuck CoW's Avatar
    Join Date
    Feb 2006
    Posts
    471

    Default yup......

    Quote Originally Posted by RevGTO
    Back in the Dark Ages, I had a dealer reflash done, and it rendered the Hypertech I bought for my gear change useless.

    They're not stupid.....They made it tough..... I tried to use a spare pcm and my bench harness to put a handheld back to stock.....I thought it worked....Then I sold the handheld.....

    The Guy I sold it to was not happy........ REFUND!

    Chuck CoW
    CoW BOOSTER! Electronic Throttle Enhancement.

    - CLICK HERE NOW FOR MORE INFORMATION! -

    VARARAM, EDELBROCK, AMERICAN RACING HEADERS, BAER BRAKES, BORLA, EFI Live, Magnuson,
    COMP Cams, PROCHARGER, PRO TORQUE, PHADT Racing, INNOVATORS WEST, and more.



  7. #7
    New Member
    Join Date
    Jun 2007
    Posts
    6

    Default

    Quote Originally Posted by RevGTO
    Back in the Dark Ages, I had a dealer reflash done, and it rendered the Hypertech I bought for my gear change useless.
    Apparently they revised it. If the dealer reflashes the computer back to stock and the Vin's match the hypertech will reinstall the software.

Similar Threads

  1. Hypertech damage? What should I do?
    By jonnyk in forum Gen III V8 Specific
    Replies: 2
    Last Post: November 30th, 2009, 02:54 PM
  2. New to efi live ls1
    By venomracing in forum Gen III V8 Specific
    Replies: 5
    Last Post: March 2nd, 2009, 01:43 PM
  3. reading hypertech flash
    By warscout2 in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: February 16th, 2007, 09:33 PM
  4. Live tuning for RFI-Live??
    By Bob's Garage in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: September 14th, 2005, 06:27 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •