Results 1 to 7 of 7

Thread: where do I download COS#5

  1. #1
    Junior Member
    Join Date
    Dec 2006
    Posts
    13

    Default where do I download COS#5

    My EfiLive V2 installation CD didn't come with Cos#5. Where do I download this?

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    See post #218: showthread.php?t=2599&page=22

    Those are currently the latest files for COS5.

  3. #3
    Junior Member
    Join Date
    Dec 2006
    Posts
    13

    Default COS#5 guidance needed

    Joe, thanks for the link.

    I'm having a little trouble getting the my 2000 T/A to run. The first thing I did was to upgrade and reflash the 2000 operating system to a stock 2002 version. After I did this I fooled with the "idling" tables to get the car to run (this was a partial success) and eventually I came across a tune located on HoldenCrazy.com which was a '99 migrated to '02 tune. Here are the descriptions and link:

    1999 Camaro Coupe 5.7 Litre Manual LS1 PCM 12212156 484,542 Bytes Stock Tune Migrated To 2002 Operating System

    http://www.holdencrazy.com/EFILive/T...t/00000020.tun


    So I reflashed this new calibration and the car would idle great. Following the COS tutorial, I full-flashed COS#5 then flashed the working calibration file. After I did this I went through the out-of-bounds tables and adjusted them according to the tutorial. Well, needless to say, the car will start and about 3 seconds later will die. Is this a typical problem? I'm very new to tuning of any kind so any insight would be greatly appreciated.

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Do you have the "TPS vs RPM" VE table disabled...?

  5. #5
    Junior Member
    Join Date
    Dec 2006
    Posts
    13

    Default

    Quote Originally Posted by joecar
    Do you have the "TPS vs RPM" VE table disabled...?

    Thanks, that fixed it. I didn't miss that in the COS Tutorial did I? Perhaps that step should be added. Now I'm getting somewhere using the RAFID process and I'm starting to have some fun.

  6. #6
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    It's buried deep inside the COS5 thread: showthread.php?t=2599
    Last edited by joecar; July 19th, 2007 at 01:35 PM.

  7. #7
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    It really needs to be collected and organized into the COS tutorial pdf.

Similar Threads

  1. Can I Download to more than one PC?
    By LBZoom in forum General (Diesel)
    Replies: 2
    Last Post: September 3rd, 2009, 07:18 PM
  2. Ver 5 download
    By BlownAlaskan in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: March 4th, 2007, 06:22 PM
  3. Download v6?
    By IllusionalTA in forum EFILive V6
    Replies: 2
    Last Post: February 24th, 2006, 10:45 AM
  4. Log and Download
    By AZTJC in forum Duramax LB7
    Replies: 1
    Last Post: December 13th, 2005, 03:20 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •