Results 1 to 4 of 4

Thread: Instructions for Driver Installation aren't avail

  1. #1
    Member pkincy's Avatar
    Join Date
    Sep 2003
    Posts
    90

    Default Instructions for Driver Installation aren't avail

    Yup, Under instructions it says that the instructions for the 2000/XP/Vista driver install are in the download. Unfortunately that seems to not be the case. I have seen this complaint posted elsewhere by searching.

    After I thought my V2 had died I suspected the problem might be drivers since my V1 still works. (it wasn't)

    Perry
    Last edited by pkincy; July 7th, 2007 at 02:31 PM.

  2. #2
    Member pkincy's Avatar
    Join Date
    Sep 2003
    Posts
    90

    Default

    The proper drivers (FTD2XX.sys from 4/06) can be downloaded with proper instructions here(or so I hope cause at least it worked).

    http://forum.efilive.com/showthread....r+installation

    The above link was found by a couple of searches.

    Perry
    Last edited by pkincy; July 7th, 2007 at 02:31 PM.

  3. #3
    Member pkincy's Avatar
    Join Date
    Sep 2003
    Posts
    90

    Default

    Here is another link to a Blacky set of instructions and a link to the drivers.

    http://forum.efilive.com/showthread....0408#post20408

    Do note that Blacky wrote this in Mar of 06 and the latest driver apparently is an April/06 driver. So make certain that you are getting the April driver.

    Perry

  4. #4
    Member pkincy's Avatar
    Join Date
    Sep 2003
    Posts
    90

    Default

    Apparently the drivers were not the problem, somehow my protocol was changed since the last time I successfully used it.

    Perry
    Last edited by pkincy; July 7th, 2007 at 02:32 PM.

Similar Threads

  1. Driver installation issue.
    By waterbug1999 in forum FlashScan V2
    Replies: 18
    Last Post: June 27th, 2008, 06:24 AM
  2. Instructions
    By JoshH in forum FlashScan V2 BB Logging
    Replies: 2
    Last Post: May 10th, 2008, 06:02 AM
  3. Looking for instructions to re-map MAF
    By 99ss in forum RoadRunner Real-Time PCM Emulator
    Replies: 1
    Last Post: August 22nd, 2007, 09:09 AM
  4. ???? Tran s is avail but I cant reg
    By Madspeed in forum FlashScan V2
    Replies: 0
    Last Post: May 21st, 2007, 03:55 PM
  5. When will BCM tuning be avail????
    By Madspeed in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: April 23rd, 2007, 01:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •