Results 1 to 5 of 5

Thread: low oil level

  1. #1
    Lifetime Member
    Join Date
    Dec 2005
    Posts
    358

    Default low oil level

    looking for a way to shut off the low oil level that is flashed when oil is low on a 1999 vett. has a ls7 in it now the sencer isnt hooked up driving customer crazy keeps flashing.i dont see a way to shut it off with efilive.so i double checked its wired though the ecm though maybe it was a body control modual.any ideas thanks rich

  2. #2
    Lifetime Member ChipsByAl's Avatar
    Join Date
    Feb 2006
    Posts
    618

    Default

    Try connecting both of the terminals together.
    Al
    "Trash that carb and get Injected!"

  3. #3
    Lifetime Member ChipsByAl's Avatar
    Join Date
    Feb 2006
    Posts
    618

    Default

    Of the Low Oil sensor connector...
    "Trash that carb and get Injected!"

  4. #4
    Lifetime Member
    Join Date
    Dec 2005
    Posts
    358

    Default low oil level

    i tryed grounding it and hitting the reset button still came on.in the wiring diagrams shows it going to ground.didnt do anything but i just was reading some one said motor has to see 194 deg. then shut off for a hour. i didnt try that with it grounded.was going to reset it with efilive but seems like it has to be drive 3 times and cooled down to get it to come back on so though hitting the reset button was a better idea comes back quicker.checked the wire with vmeter has 10v with key on

  5. #5
    Lifetime Member
    Join Date
    Dec 2005
    Posts
    358

    Default

    ok got it figured out hooked it to ground works just had to run it and let it cool for a while hour or so so it would reset its self

Similar Threads

  1. E38 fuel level sensor calibration
    By harascho in forum E37, E38 & E67 PFI ECM's
    Replies: 13
    Last Post: November 29th, 2009, 03:39 PM
  2. What to change with FLT Level 4 Trans
    By samh_08 in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 6
    Last Post: April 21st, 2009, 12:00 PM
  3. Fuel Level Sensor Primary F0101
    By Schweinmesser in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 1
    Last Post: February 10th, 2009, 05:01 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •