Results 1 to 8 of 8

Thread: EFI Live V2/USB Comunication Problem

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    New Member
    Join Date
    Mar 2007
    Posts
    3

    Default EFI Live V2/USB Comunication Problem

    I can no longer communicate with the V2.

    I think I have it narrowed down to a problem between the PC and the V2. I have installed the software on 3 different laptops now and it still will not communicate. When I plug in the USB connection the PC does not see the V2. I can not check the Firmware or load a tune. I get the message stating it is in Demo mode because it can not see the V2 (I am not sure why that keeps happening since I did register the product as the message states). I have also tried a different USB cable and it does the same thing.

    The 4th led blinks for a couple of seconds when i plug in the USB Cable. It appears to be flashing a code. It flashes 4 time then pauses then 2 times. it repeats this 2 times then goes out. It appears to be flashing a 42 code of some kind.

    Any ideas???

    However, if I disconnect the USB Connection and only plug in the OBDII connector the unit powers and functions fine.

    Thanks,
    Cary
    Last edited by castewart; July 17th, 2007 at 07:03 AM.

Similar Threads

  1. Replies: 3
    Last Post: October 29th, 2009, 08:09 AM
  2. New To EFI Live
    By Mike Miller in forum Duramax LB7
    Replies: 2
    Last Post: July 23rd, 2008, 09:22 AM
  3. PID Problem w/BBB - Asked by Cougar 281 (FRPDES problem)
    By Jasondt2001 in forum FlashScan V2 BB Logging
    Replies: 2
    Last Post: March 23rd, 2008, 01:02 PM
  4. Efi Live Tuning Problem,, Need Help
    By Boll Curlee in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: November 18th, 2006, 06:43 AM
  5. Live tuning for RFI-Live??
    By Bob's Garage in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: September 14th, 2005, 05:27 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •