First post newb
Hello All
just getting my first post under way. can't wait to get my 57 Chevy with LS1, Viper Specked 6 speed, and C4 corvette suspension underway with the addition of a built twin turboed LS6 after I et the chassis tweaked so any good turbo help would be a great help.
Later
Russell
R^3
Russell/R³, welcome to the forum......sounds like a fun project!
Hi Russell,
thought I'd do the same in your thread (hope you don't mind).
I'm based in Mackay Nth QLD. Hi all.
Cheers
Leppy
Clubby5000i, also welcome to the forum...
Gidday Clubby.
Mackay....how's the weather up there?
Little warmer than here I'd guess
Howard
YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
DUCT TAPE.
IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.
98 K1500 'HOLDEN' Suburban.
Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit
The weather's always nice in tropical Mackay...
and here in Texas it's 98 F with a average humidity of 95% not counting all the rain.
R^3
I just got back from AZ.
It was around 120!
The fact that people live in that heat is just lunacy!
Sorry I didn't get to catch up with you Joe...I ate the Cherry Ripe!
Howard
YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
DUCT TAPE.
IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.
98 K1500 'HOLDEN' Suburban.
Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit
Posting Permissions
Reply With Quote