Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Can't get 7.4.2 with new E38 download to read cal file #12597121...help.

  1. #1
    Senior Member
    Join Date
    Mar 2006
    Posts
    180

    Default Can't get 7.4.2 with new E38 download to read cal file #12597121...help.

    Stripped EFI off my desktop today. Downloaded the latest v7.4.2. Down loaded the E38,T42 and allison updates. Downloaded the July 19 cal files.

    But I can't open a os12614676 cal12597121 file...I get "UNRECOGNIZED PCM" etc.etc.

    Any ideas ?

    TIA.

  2. #2
    Lifetime Member eboggs_jkvl's Avatar
    Join Date
    Apr 2004
    Posts
    757

    Default

    Update the V2 Firmware?
    2014 Corvette Convertible, Torch Red, A6, Z51, 3LT, NPP Exhaust



  3. #3
    Senior Member
    Join Date
    Mar 2006
    Posts
    180

    Default

    I'm just trying to demo read files. I keep my commercial license on my laptop.

  4. #4
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,936

    Default

    Have the latest pre-release files for the E38/E67?
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

  5. #5
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Quote Originally Posted by onfire
    Stripped EFI off my desktop today. Downloaded the latest v7.4.2. Down loaded the E38,T42 and allison updates. Downloaded the July 19 cal files.

    But I can't open a os12614676 cal12597121 file...I get "UNRECOGNIZED PCM" etc.etc.

    Any ideas ?

    TIA.
    I don't think the OS 12597121 is supported, if you have a tun file of that can you please send it to support@efilive.com

    As for the other OS, just make sure the .cal files were saved in to the directory - \Program Files\EFILive\V7\Calibrations\E38

    Cheers,
    Ross
    I no longer monitor the forum, please either post your question or create a support ticket.

  6. #6
    Lifetime Member jfpilla's Avatar
    Join Date
    Apr 2003
    Posts
    666

    Default

    Quote Originally Posted by GMPX
    I don't think the OS 12597121 is supported, if you have a tun file of that can you please send it to support@efilive.com

    As for the other OS, just make sure the .cal files were saved in to the directory - \Program Files\EFILive\V7\Calibrations\E38

    Cheers,
    Ross
    He's trying to read OS 12614676
    and looking for CAL 12597121(not OS 12597121) in the E38 directery, which he won't find.
    2003 red vert
    Mods:
    LS7 crate engine, wet sump, 24xx reluctor
    LPE 100mm MAF
    Vararam, cold air intake and bridge
    RPM Level 6/4L60e trans
    3.42 gears
    Yank SS3600
    1-7/8" AR headers
    Z06 exhaust
    470rwhp 437rwtq
    1/8th mi-1.526-60'-6.862-1/8th-@100.74mph

  7. #7
    Senior Member
    Join Date
    Mar 2006
    Posts
    180

    Default

    As for the other OS, just make sure the .cal files were saved in to the directory - \Program Files\EFILive\V7\Calibrations\E38


    OS 12614676 is in the e38 file but I'm still getting the "Unrecogized PCM" warning.

    Is it because I'm just using the Demo version on my desktop?

  8. #8
    Senior Member
    Join Date
    Mar 2006
    Posts
    180

    Default

    Figured it out...had to strip EFI off the Document files also and reinstall....all is good.

  9. #9
    Lifetime Member jfpilla's Avatar
    Join Date
    Apr 2003
    Posts
    666

    Default

    Quote Originally Posted by onfire
    Figured it out...had to strip EFI off the Document files also and reinstall....all is good.
    Phew!
    2003 red vert
    Mods:
    LS7 crate engine, wet sump, 24xx reluctor
    LPE 100mm MAF
    Vararam, cold air intake and bridge
    RPM Level 6/4L60e trans
    3.42 gears
    Yank SS3600
    1-7/8" AR headers
    Z06 exhaust
    470rwhp 437rwtq
    1/8th mi-1.526-60'-6.862-1/8th-@100.74mph

  10. #10
    Senior Member
    Join Date
    Mar 2006
    Posts
    180

    Default

    Quote Originally Posted by jfpilla
    Phew!

    I've tuned two turbo systems on the ls1 platform. This new E38 platform is wayyyy over my head....ve calcs instead of tables, etc....incredible tuning power there.

Page 1 of 2 12 LastLast

Similar Threads

  1. Anyway to read a HPT file?
    By turboolds in forum FlashScan V2
    Replies: 1
    Last Post: December 16th, 2008, 08:17 PM
  2. logged file can't read
    By knagel in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 0
    Last Post: June 22nd, 2008, 01:27 PM
  3. Looking for a 12597121 cal file to add to e38
    By onfire in forum Gen IV V8 Specific
    Replies: 3
    Last Post: August 1st, 2007, 10:46 AM
  4. Need help. Trying to read ls1edit file with efilive
    By BrianC98Z28 in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: March 12th, 2007, 02:23 AM
  5. Read a 1997 Corvette File Does this look right?
    By vetteboy2k in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: October 20th, 2005, 04:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •