Results 1 to 9 of 9

Thread: E67 supported vehicles & Cal files (Updated 21-October-2008)

  1. #1
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Exclamation E67 supported vehicles & Cal files (Updated 21-October-2008)

    E67 ECM Service # 12603530 or 12605843 or 12607096

    As of EFILive V7.5.5 we are able to deliver calibration updates and new vehicle support via automated on-line updates. Any new operating systems added to the software will no longer be posted in this thread as zip files to extract prior to a new installation release being made available, your software will automatically download updates.
    If you don't have V7.5.5 installed on your PC can can download it HERE.

    If you have any further questions on E67 vehicle support please email support@efilive.com

    Thanks,
    Ross

    ** Hybrid ECM's have a reduced number of tables & parameters, see HERE for more details.
    Last edited by GMPX; March 17th, 2010 at 09:56 AM. Reason: Updated information
    I no longer monitor the forum, please either post your question or create a support ticket.

  2. #2
    Lifetime Member
    Join Date
    Jul 2003
    Posts
    1,897

    Default

    You should add the Colorado 5 cyls... They are using this PCM.. this is an almighty PCM.
    "All that is needed for the triumph of evil is that good men do nothing..."

  3. #3
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    The only E67 OS I've seen on the Colorado is 12620193 which is in that list.

    Cheers,
    Ross
    I no longer monitor the forum, please either post your question or create a support ticket.

  4. #4
    Member
    Join Date
    Sep 2006
    Posts
    74

    Default E67 os 12609256 h0159

    I didn't know where else to post this. Feel free to move it where ever it belongs.

    We are putting a 2007 Impala SS 5.3 in the back of a Pontiac Fiero. I need a little help from the experts. "H0159 Vehicle Speed Output Signal" is marked as "NO" in our tune. We need a VSS to send to the stock 88 Fiero Speedo. If I mark this "YES" what wire does my signal come out on with this PCM? The 07 Impala uses a serial bus for the tach signal. We need a PPM signal for the Fiero. Thanks in advance for your help.
    Attached Files Attached Files
    Last edited by finishline; January 29th, 2010 at 03:47 PM. Reason: adding info

  5. #5
    Lifetime Member
    Join Date
    Dec 2007
    Posts
    1,143

    Default

    Quote Originally Posted by finishline View Post
    I didn't know where else to post this. Feel free to move it where ever it belongs.

    We are putting a 2007 Impala SS 5.3 in the back of a Pontiac Fiero. I need a little help from the experts. "H0159 Vehicle Speed Output Signal" is marked as "NO" in our tune. We need a VSS to send to the stock 88 Fiero Speedo. If I mark this "YES" what wire does my signal come out on with this PCM? The 07 Impala uses a serial bus for the tach signal. We need a PPM signal for the Fiero. Thanks in advance for your help.
    It depends on the calibration that is in the ECM but...

    If you are talking E67 then it is probably going to be on C1-39 (E38 pin 57 C1) - if it will work at all. Some dont.

    Tacho can be reset to PWM or crank in G1201.


  6. #6
    Member
    Join Date
    Sep 2006
    Posts
    74

    Default

    Quote Originally Posted by gmh308 View Post
    It depends on the calibration that is in the ECM but...

    If you are talking E67 then it is probably going to be on C1-39 (E38 pin 57 C1) - if it will work at all. Some dont.

    Tacho can be reset to PWM or crank in G1201.

    Thanks for the information. I did see the G1201. Can you tell me what connector and pin that signal would come out on?

  7. #7
    Lifetime Member
    Join Date
    Dec 2007
    Posts
    1,143

    Default

    Quote Originally Posted by finishline View Post
    Thanks for the information. I did see the G1201. Can you tell me what connector and pin that signal would come out on?
    Would if I knew .

    Best shot would be to find schematics for an earlier truck or car using the E67 that had direct connect tacho, or same for ZR1 Corvette, and check them out to find the pin, and then post back here would be appreciated. E38 is pin 57 C1.

    Good chance changing G1201 to crank 15/15 you will get a 4 cyl tacho output signal.


  8. #8
    New Member
    Join Date
    Aug 2005
    Posts
    3

    Default

    Hi Guys,

    Does anyone have the BIN files for a 2008 STS-V?
    thanks

  9. #9
    Senior Member doubledip's Avatar
    Join Date
    May 2008
    Posts
    163

    Default

    E67 - C1 Pin 25 Tacho

    E67 - C1 Pin 39 Speedo
    ---------------------------
    E38's got to love them
    E40's hate 'em

    LS1's is there anything it wont work on

    Holden VE SSV - GEN46L

    www.ultimateconversionwiring.com.au

    www.dualflash.com.au

Similar Threads

  1. P12 supported vehicles & Cal files (Updated 20-Feb-2008)
    By GMPX in forum IL6,IL5,IL4 Atlas Engines - P12 PCM
    Replies: 4
    Last Post: February 12th, 2009, 10:13 PM
  2. E38 supported vehicles & Cal files (Updated 21-October-2008)
    By GMPX in forum E37, E38 & E67 PFI ECM's
    Replies: 0
    Last Post: June 17th, 2007, 12:04 PM
  3. TCM supported vehicles
    By GMPX in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 0
    Last Post: January 4th, 2007, 10:47 AM
  4. Supported Vehicles
    By Blacky in forum Lounge
    Replies: 3
    Last Post: December 1st, 2006, 04:16 PM
  5. Supported vehicles
    By Ladyredhawk in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: February 14th, 2005, 11:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •