Results 1 to 5 of 5

Thread: IFR for truck

  1. #1
    Junior Member
    Join Date
    Oct 2005
    Posts
    25

    Default IFR for truck

    I'm going to put some 43# delphi injectors in a 2001 Silverado. From what I've read I need to put the same number in all the cells but I have yet to figure out what that number is. Also I need to know what the cylinder volume is for a 370 ci motor.
    Thanks for the help,
    John
    '01 Silverado 1/8th 7.06 @ 96.5 1.55 60'

  2. #2
    Lifetime Member 5.7ute's Avatar
    Join Date
    Oct 2006
    Posts
    1,840

    Default

    Cylinder volume for a 6 litre is 745.9.
    43 lb/hr injectors flow 5.418G/SEC

  3. #3
    Junior Member
    Join Date
    Oct 2005
    Posts
    25

    Default

    Thank you for the info. The motor is .030 over so I think it's a 6.1 litre. Not sure if it matters.
    '01 Silverado 1/8th 7.06 @ 96.5 1.55 60'

  4. #4
    Lifetime Member
    Join Date
    Aug 2005
    Posts
    710

    Default

    You are correct. A 2001 Silverado has a manifold referenced fuel pressure regulator, so all values should be the same.

    Justin

  5. #5
    Lifetime Member SSpdDmon's Avatar
    Join Date
    Jun 2005
    Posts
    1,558

    Default

    Quote Originally Posted by dc_justin
    You are correct. A 2001 Silverado has a manifold referenced fuel pressure regulator, so all values should be the same.

    Justin
    I wish we had those in f-bodies.

Similar Threads

  1. Replies: 1
    Last Post: October 16th, 2008, 11:01 AM
  2. 6.0 truck with procharger
    By DKD in forum Gen III V8 Specific
    Replies: 1
    Last Post: July 24th, 2008, 11:01 AM
  3. E38 gmc 5.3L truck ???
    By 1FastZ in forum E37, E38 & E67 PFI ECM's
    Replies: 5
    Last Post: September 20th, 2007, 07:39 AM
  4. Put Z06 cam in 4.8 truck
    By minytrker in forum General (Petrol, Gas, Ethanol)
    Replies: 19
    Last Post: August 16th, 2006, 09:27 AM
  5. Need 2004 pcm for truck
    By minytrker in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: June 11th, 2006, 01:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •