Results 1 to 4 of 4

Thread: lean wot with big ve numbers and low injector duty cycle

  1. #1
    Lifetime Member
    Join Date
    Dec 2005
    Posts
    358

    Default lean wot with big ve numbers and low injector duty cycle

    not sure why this is happening i have 140s to 150 ve numbers and duty cycle of only 60s and a 70% and lean as heck 14.00 with comands of 12.5 custom operating system 02020003 gm operating system 12212156.i will post a log and the tune it was run on got me lost
    Attached Files Attached Files

  2. #2
    Senior Member
    Join Date
    Mar 2006
    Posts
    180

    Default

    3.1 injector what's the engine combo? Might be out of injector regardless of dc....should be pig rich.

  3. #3
    Lifetime Member TAQuickness's Avatar
    Join Date
    Jan 2005
    Posts
    2,940

    Default

    In your tune, P0101, P0102, & P0103 processing enablers are set to not reported, so you are not falling into SD mode. You need to set those three to "non-emissions."


  4. #4
    Lifetime Member
    Join Date
    Dec 2005
    Posts
    358

    Default

    thats was it thanks now if the short turm fuel trims work its done. thanks again

Similar Threads

  1. injector duty cycle
    By minytrker in forum General
    Replies: 6
    Last Post: September 10th, 2009, 05:24 AM
  2. Injector duty cycle..
    By LS1_Dragster in forum Gen III V8 Specific
    Replies: 0
    Last Post: June 26th, 2008, 07:21 AM
  3. Injector PW & Duty Cycle
    By LS1_Dragster in forum Gen III V8 Specific
    Replies: 3
    Last Post: June 15th, 2008, 04:39 PM
  4. Injector Duty Cycle??
    By Ponch in forum Gen IV V8 Specific
    Replies: 14
    Last Post: September 9th, 2007, 02:30 PM
  5. Injector Duty Cycle ?
    By DrX in forum General (Petrol, Gas, Ethanol)
    Replies: 13
    Last Post: April 9th, 2006, 05:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •