Is it possible to change the Kpa Label for 2 bar tuning in the various tables? This software does everything else just wondering if its possible for a simple minded guy like myself????
The auto-tune is pure Genius, it works slicker than dog snot..
Is it possible to change the Kpa Label for 2 bar tuning in the various tables? This software does everything else just wondering if its possible for a simple minded guy like myself????
The auto-tune is pure Genius, it works slicker than dog snot..
Any closer....Rumor has it coming the 1st week of August with a bunch of enhancements....for boosted tuningOriginally Posted by MN C5
Rumours are correct, though they might even be released before then, fingers crossed.Originally Posted by MN C5
Cheers,
Ross
Very cool... I'm very glad I went with Flashscan. I'd still be holding my breath for V2.0 from the competion..
I'd be a happy beta tester if you need one
the 2 bar setup will just be a download? when will this be available? i was under the impression that it was already part of the system i purchased a week ago. i have the commercial scan and tune. i am trying to tune a blown gto, any update yet?
2 bar code will be a download but you will still need to tune the boost tables , if you have already done a 1 bar tune N/A SD with the bigger injectors the bae tune will transfer straight over , if not you will need to do a full tune both 1 bar and 2 bar - not really something for the novice to attempt as there first tune.Originally Posted by blackblowngto
As a starting point I woudl recomend disconnecting the blower when you are starting to go to a 2 bar tune ,add the 2 bar map sensor then tune the car 100% up to 100kpa , once you have it all running sweet then attatch the blower belt and continue on from 100 kpa to 200 kpa
You can tune your GTO with a 2bar now if you wish, do you have a 2bar sensor on the car yet?.Originally Posted by blackblowngto
Cheers,
Ross
Its very easy to tune for the 2bar map. You just need to understand your map scale needs to be adjusted... i.e. 50kpa on the column header is now 100kpa ect...