Fast tranny re-learn???

[Boost]

You know how it takes days for the tranny to shift perfect again after you add a lot of horsepower? I read a guy's posts on the Diesel Place about a "fast tranny re-learn" that he enables with his PPE tuner that "resets" the tranny, and puts it into fast re-learn mode. He says it takes only a few miles.
Is this possible and does it work? Can we "reset" the tranny with EFILive?

[IdahoRob]

We can't yet on the LBZ. You can on the LB7/LLY. I'd think the PPE doesn't do it either for the LBZ, just shows that it did. IMO

[Boost]

Ok, so how do you do it on the LB7/LLY? And what are we waiting for on the LBZ?

[rustynuts]

ttt

i'm curious about this also. lbz and lly.

[IdahoRob]

Go into the scan tool and you'll see the allison symble. Click on that and you'll see a pop up of allison controls. Select which taps you want cleared and thats it.

[rustynuts]

Go into the scan tool and you'll see the allison symble. Click on that and you'll see a pop up of allison controls. Select which taps you want cleared and thats it.

thanks for the reply rob.

[Boost]

A topic of interest regarding this:

http://forum.efilive.com/showthread.php?t=5983

[Boost]

I am able to reset TAPS on the 6 speed Ally with the Tech2. Cool!

[GMPX]

Thanks for those that responded, currently you can't do it on the 6spd TCM only the 5spd as Rob pointed out.
We are going to revisit the bi-di controls for all controllers before we start writing version 8 software, you won't have to wait until then.

Cheers,
Ross